Show simple item record

AuthorManasrah, Abdallah D.
AuthorLaoui, Tahar
AuthorZaidi, Syed Javaid
AuthorAtieh, Muataz A.
Available date2023-07-16T11:40:14Z
Publication Date2017-01-01
Publication NameExperimental Thermal and Fluid Science
Identifierhttp://dx.doi.org/10.1016/j.expthermflusci.2017.02.018
CitationManasrah, A. D., Laoui, T., Zaidi, S. J., & Atieh, M. A. (2017). Effect of PEG functionalized carbon nanotubes on the enhancement of thermal and physical properties of nanofluids. Experimental Thermal and Fluid Science, 84, 231-241.‏
ISSN08941777
URIhttps://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85014096936&origin=inward
URIhttp://hdl.handle.net/10576/45661
AbstractIn this study, pristine carbon nanotubes and polyethylene glycol functionalized carbon nanotubes (CNT-PEG) have been used to enhance the heat capacity, viscosity, thermal conductivity, heat transfer rate and pressure drop of nanofluids. Multi-walled carbon nanotubes (MWCNT) were functionalized with polyethylene glycol (PEG) using a Fischer esterification method to improve their dispersion in aqueous media. Three concentrations of 0.01 wt%, 0.05 wt% and 0.1 wt% of pristine and functionalized CNTs in the nanofluids have been used. The heat-transfer rate and pressure drop of these nanofluids have been measured in a shell and tube heat exchanger. Differential Scanning Calorimetry (DSC) was used to study the specific heat capacity of the nanofluids. The specific heat capacity of pristine and functionalized CNTs mixed with water was found to be significantly higher than of the pure water by 10% and 45% respectively. The results of the heat transfer of the nanofluids increased suddenly with the increasing the concentrations of both pristine and functionalized CNTs. It can be concluded that the functionalizing CNT with Polyethylene glycol enhanced the dispersion of the CNTs and increased their heat capacities. The viscosity of the nanofluids was found to be dependent on the concentration of CNTs in solution. The pressure drop of the nanofluid compared with that of pure water was almost unchanged resulting in no extra pumping energy penalty.
SponsorThe authors would like to acknowledge the support provided by King Abdulaziz City for Science and Technology (KACST) through Science & Technology Unit at King Fahd University of petroleum & Minerals (KFUPM) for funding this work through project No: 09-NAN758-04 titled “Experimental Investigation of Heat Transfer Characterization for CNT-Nanofluid in Heat Exchangers” as part of the National Science Technology and Innovation Plan (NSTIP).
Languageen
PublisherElsevier Inc.
SubjectFunctionalized carbon nanotube
Heat capacity
Nanofluids
Pressure drop
TitleEffect of PEG functionalized carbon nanotubes on the enhancement of thermal and physical properties of nanofluids
TypeArticle
Pagination231-241
Volume Number84
dc.accessType Abstract Only


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record