عرض بسيط للتسجيلة

المؤلفHassan, Mohammad K.
المؤلفShaikh, Shifa
المؤلفZagho, Moustafa
المؤلفNasser, Mustafa
المؤلفGu, Xiaodan
المؤلفNazarenko, Sergei
المؤلفKarim, Alamgir
تاريخ الإتاحة2023-08-31T13:19:33Z
تاريخ النشر2023
اسم المنشور2nd International Conference on Civil Infrastructure and Construction (CIC 2023)
الاقتباسHassan M., Shaikh S., Zagho M., Nasser M., Gu X., Nazarenko S., & Karim A., "Advanced Block Copolymer Membranes for Oily Industrial Wastewater Treatment", The 2nd International Conference on Civil Infrastructure and Construction (CIC 2023), Doha, Qatar, 5-8 February 2023, DOI: https://doi.org/10.29117/cic.2023.0175
الرقم المعياري الدولي للكتاب2958-3128
معرّف المصادر الموحدhttp://dx.doi.org/10.29117/cic.2023.0175
معرّف المصادر الموحدhttp://hdl.handle.net/10576/47128
الملخصTremendous amounts of oily wastewater are produced daily from industrial processes, including petrochemical, textile, leather, and steel processing. This wastewater is a huge challenge to the environment and industry uses multiple approaches to separate the water from oil including oil-absorbing materials, gravity separation, flocculation, and coagulation. However, these concepts are ineffective in separating oily water emulsions where the oil droplets are smaller than 20 µm in size and do not perform well upon incorporating chemicals or using an electric field. Membrane filtration is one of the best strategies to handle such emulsions, especially the surfactant-stabilized ones, as they yield highly pure water permeate via simple filtration process and they can be cleaned re-used for multiple times at large-industrial scales. This presentation will give an overview of novel polystyrene-based copolymer membranes developed and tested at Qatar University in collaboration with the University of Southern Mississippi. The newly developed membranes display substantial enhancement in separating oil from water in tight emulsions while demonstrating remarkably high resistance to fouling over five runs in comparison to the commercial membranes that get fouled within only two emulsion runs. The presentation will outline the membranes' oil rejection efficiency, chemical, morphological, and mechanical stability after cycles of cleaning and reuse. Finally, the membranes were tested using synthetic oily water and real-field samples and testing protocols from the oil & gas companies in Qatar.
راعي المشروعThis project was made possible by NPRP grants # NPRP12S-0306-190247 and NPRP10-0127-170269 from the Qatar National Research Fund (a member of Qatar Foundation).
اللغةen
الناشرQatar University Press
الموضوعUltrafiltration; Block Copolymers composite membranes; Oil/water separation; Roll to Roll; Fouling resistance
العنوانAdvanced Block Copolymer Membranes for Oily Industrial Wastewater Treatment
النوعConference Paper
الصفحات1417-1421
ESSN2958-3136
dc.accessType Open Access


الملفات في هذه التسجيلة

Thumbnail

هذه التسجيلة تظهر في المجموعات التالية

عرض بسيط للتسجيلة