Show simple item record

AuthorWong, Kar Kit
AuthorJawad, Zeinab Abbas
AuthorChin, Bridgid Lai Fui
Available date2024-04-22T04:57:07Z
Publication Date2021
Publication NameJournal of Polymer Research
ResourceScopus
ISSN10229760
URIhttp://dx.doi.org/10.1007/s10965-020-02361-5
URIhttp://hdl.handle.net/10576/54004
AbstractRecently, carbon capture utilizing membrane technology has received much attention to limit the adverse effect caused by rising carbon dioxide (CO2) concentration in the atmosphere as they are less energy intensive and more environmentally friendly. Among the type of membranes, mixed matrix membranes (MMMs) has shown promising gas separation results. In this study, polymer blend MMMs were fabricated using polyethylene glycol (PEG), polyethersulfone (PES), multi-walled carbon nanotubes (MWCNTs) and solvent N,N-dimethylformamide (DMF) using wet phase-inversion technique. Results shown that functionalized MWCNTs (MWCNTs-F) were able to enhance gas separation performance of MMM. Furthermore, the effect of MWCNTs-F loading (0.005 wt% to 0.03 wt%) and polymer composition (PEG-PES weight ratio of 20:20, 30:10 and 32:8) were also studied. Results shown both parameters affect the gas separation performance of MMMs. The best performance in term of CO2/Nitrogen (N2) selectivity is found to be 1.235 ± 0.002 for MMM fabricated with 30 wt% PEG, 10 wt% PES and 0.02 wt% MWCNTs-F. In addition, MMM synthesized with PEG-PES weight ratio of 20:20 can withstand a pressure of 1.2 bar, indicating high mechanical strength. Hence, it is applicable in the post combustion carbon capture industry as typical flue gas has a pressure of 1.01 bar.
SponsorThe authors acknowledge the Ministry of Higher Education Malaysia (MOHE) for providing Fundamental Research Grant Scheme (FRGS) (MOHE Ref No: FRGS/1/2015/TK02/CURTIN/03/01) and Cost Centre: 001048. The authors would also extend their appreciation to LRGS USM (Account No: 304/PJKIMIA/6050296/U124) and Curtin Cost Centre: 001047.
Languageen
PublisherSpringer Science and Business Media B.V.
SubjectCarbon capture
Functionalized carbon nanotubes (MWCNTs-f)
Mixed matrix membranes (MMMs)
Polyethersulfone (PES)
Polyethylene glycol (PEG)
TitleA polyethylene glycol (PEG) – polyethersulfone (PES)/multi-walled carbon nanotubes (MWCNTs) polymer blend mixed matrix membrane for CO2/N2 separation
TypeArticle
Issue Number1
Volume Number28
dc.accessType Abstract Only


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record