Experimental and numerical investigation of the flexural behavior of one-way RC slabs strengthened with near-surface mounted and externally bonded systems
المؤلف | Aljidda, Omar |
المؤلف | El Refai, Ahmed |
المؤلف | Alnahhal, Wael |
تاريخ الإتاحة | 2024-08-08T05:23:22Z |
تاريخ النشر | 2024 |
اسم المنشور | Construction and Building Materials |
المصدر | Scopus |
الرقم المعياري الدولي للكتاب | 9500618 |
الملخص | This study investigated the flexural performance of one-way reinforced concrete (RC) slabs strengthened with two distinct strengthening systems: near-surface mounted (NSM) bars and externally bonded (EB) carbon fiber-reinforced polymer (FRP) strips. The NSM bars comprised four types: carbon FRP (CFRP), basalt FRP (BFRP), glass FRP (GFRP), and stainless-steel (SS) bars. The NSM-strengthened slabs showcased substantial enhancements in yield and ultimate load capacity, ranging from 20 % to 55 % and 59-123 %, respectively. In comparison, those strengthened with EB-CFRP strips displayed increases from 46 % to 107 % and 45-177 %, respectively, depending on the axial stiffness ratio of the strengthening system provided. Furthermore, the slabs reinforced with NSM-BFRP bars showed an 11-25 % improvement in their ductility indices. In contrast, the slabs reinforced with EB experienced a decrease in ductility ranging from 38 % to 50 %. This reduction was attributed to the differences in the modes of failure observed in both strengthening systems. The rupture of the NSM-FRP bars and the strain readings associated at the end of testing confirmed that the tensile strength of the NSM-FRP bars was fully exploited whereas the EB-CFRP strips utilized only 29-36 % of their ultimate tensile strain due to debonding. A finite element (FE) model was formulated to anticipate the behavior of the strengthened slabs. A strong correlation between the numerical predictions and the experimental outcomes was observed. The experimental-to-numerical ratios of the ultimate load ranged between 1.0 and 1.08 for the NSM-strengthened slabs and between 0.98 and 1.38 for the EB-strengthened slabs. This validated the FE models' ability to capture the nonlinear performance of the strengthened slabs. |
راعي المشروع | The authors would like to acknowledge the financial support provided by the Natural Sciences and Engineering Research Council of Canada (NSERC) through their Discovery Grant Program - Award No. RGPIN-2017-04278 rewarded by the 2nd author and by Qatar University (Fund No. QUST-1-CENG-2020-17 ) rewarded by the 3rd author. |
اللغة | en |
الناشر | Elsevier |
الموضوع | Externally bonded Fiber-reinforced polymers Flexure behavior Near-surface mounted Slabs Strengthening |
النوع | Article |
رقم المجلد | 421 |
تحقق من خيارات الوصول
الملفات في هذه التسجيلة
هذه التسجيلة تظهر في المجموعات التالية
-
الهندسة المدنية والمعمارية [778 items ]