Show simple item record

AuthorMohamed, Assem T.
AuthorKumar, Anand
AuthorZekri, Atef
AuthorAbotaleb, Ahmed
AuthorSinopoli, Alessandro
AuthorAl-Qaradawi, Siham Y.
AuthorAhmad, Yahia H.
Available date2025-07-31T07:17:47Z
Publication Date2024-12-28
Publication NameGas Science and Engineering
Identifierhttp://dx.doi.org/10.1016/j.jgsce.2024.205533
CitationAhmad, Y. H., Mohamed, A. T., Kumar, A., Zekri, A., Abotaleb, A., Sinopoli, A., & Al-Qaradawi, S. Y. (2025). Impact of trace noble metals on the catalytic performance of LaNiMgO towards methane dry reforming. Gas Science and Engineering, 134, 205533.
ISSN2949-9097
URIhttps://www.sciencedirect.com/science/article/pii/S2949908924003297
URIhttp://hdl.handle.net/10576/66680
AbstractCO2 reforming of methane was investigated using trace noble metal anchored MgO-promoted Ni/La2O3 catalyst (LaNiMgO-X), where X = Ir, Pt, Ru, Pd, and Rh. The incorporation of noble metals enhanced Ni dispersion on the support and facilitated the Ni reducibility due to the H2 spillover effect. At 650 °C and in the early stages of the reaction, all catalysts exhibited enhancement in the catalytic activity. However, at longer times, the control and Pd-embedded catalysts revealed sharp decay in the catalytic activity compared to counterparts, which was assigned to the extensive coke deposition originated by methane cracking methane and Boudouard reactions. Whereas, other noble metals embedded catalysts, in particular, Rh- and Ir-anchored catalysts exhibited high chemical durability with minor decay in the catalytic activity. For instance, after 25h, LaNiMgO-Pd exhibited 22.7 % and 33.2 % decay of its maximum CO2 and CH4 conversion, respectively, while LaNiMgO lost 19.7 % and 27.2 % of its maximum CO2 and CH4 conversion, respectively. On the other hand, at the same time-on-stream LaNiMgO-Rh lost 0.3 and 0.7 % of its maximum CO2 and CH4 conversions, respectively.In durability measurements, and after 140h LaNiMgO-Rh exhibited slight decay in the CO2 conversion from 77.6 % to 70.5%, the CH4 conversion decreased from 72.3% to 64.2%. On the other hand, LaNiMgO-Pd depicted rapid decay in the CO2 conversion from 68.3 % to 49.3 % and the CH4 conversion felled from 66.5 % to 41.5 % after 50h. In addition, the reactor was blocked in case of LaNiMgO-Pd after about 54h.Excluding Pd, the enhancement of noble metals was assigned to the formation of noble metal-rich Ni surfaces, which suppressed the oxidation of nickel and enhanced the gasification of deposited coke. In addition, the presence of noble metals at the Ni surface afforded a high density of adsorbed oxygen species, which enhanced coke gasification and consequently decreased the extent of deactivation of the catalysts by coke formation. While Pd-anchored sample showed extensive carbon deposition, in particular, recalcitrant γ-carbon, which is hardly gasified, encapsulating the active Ni catalyst, which causes catalyst deactivation.
Languageen
PublisherElsevier
SubjectTrace noble metals
Methane dry reforming
Nickel
Lanthanum oxide
Magnesium oxide promoter
TitleImpact of trace noble metals on the catalytic performance of LaNiMgO towards methane dry reforming
TypeArticle
Volume Number134
Open Access user License http://creativecommons.org/licenses/by/4.0/
ESSN2949-9089
dc.accessType Full Text


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record