Search
Now showing items 31-40 of 40
Influence of TiO2 nanoparticles incorporation to friction stir welded 5083 aluminum alloy on the microstructure, mechanical properties and wear resistance
(
Elsevier
, 2017 , Article)
The aim of the current study is to investigate the effect of addition of TiO2 nanoparticles and friction stir welding (FSW) parameter such as number of passes on microstructure, mechanical and tribological properties of ...
A review on composite materials based on recycled thermoplastics and glass fibres
(2011 , Article Review)
Mechanical properties The purpose of this paper is to review recent work on composite materials based on recycled thermoplastics and glass fibres (GFs). The high collection and separation cost of plastics waste, and the ...
Effect of hot extrusion and T6 heat treatment on microstructure and mechanical properties of Al-10Zn-3.5Mg-2.5Cu nanocomposite reinforced with graphene nanoplatelets
(
Elsevier Ltd
, 2018 , Article)
Al-10Zn-3.5Mg-2.5Cu/graphene nanocomposites were developed by a combination of liquid metallurgy and hot extrusion techniques. The effect of varying graphene content (0.1%, 0.3%, 0.7% and 1.0%) on microstructure and ...
Structural and mechanical properties of microwave sintered Al-Ni50Ti50 composites
(
Elsevier B.V.
, 2016 , Article)
Metal matrix composites (MMCs) have become attractive for structural engineering applications due to their excellent specific strength and are becoming an alternative to the conventional materials particularly in the ...
Enhancing compressive, tensile, thermal and damping response of pure Al using BN nanoparticles
(
Elsevier Ltd
, 2018 , Article)
In the present study, aluminum based metal matrix composites containing various amounts of boron nitride (BN) nanoparticulates (0, 0.5, 1.0 and 1.5 vol.%) were fabricated by using the powder metallurgy (PM) technique ...
Silk as a reinforcement in polymer matrix composites
(2015 , Book chapter)
Natural fibers perform well as reinforcement materials in polymer matrix composites and provide ecological and environmental advantages. Both plant- and animal-based natural fibers have been studied for their mechanical ...
The effects of gas tungsten arch welding on the corrosion and mechanical properties of AA 6061 T6
(2013 , Article)
Corrosion of welded and un-welded Aluminum Alloy 6061 T6 was investigated by immersing specimens in 3.5% (wt) NaCl solution. Potentiodynamic and open circuit potential measurements were conducted. The mechanical properties ...
Melt processing and properties of linear low density polyethylene-graphene nanoplatelet composites
(
Elsevier Ltd
, 2016 , Article)
Composites of Linear Low Density Polyethylene (LLDPE) and Graphene Nanoplatelets (GNPs) were processed using a twin screw extruder under different extrusion conditions. The effects of screw speed, feeder speed and GNP ...
Thermal and mechanical properties of PP/HDPE/wood powder and MAPP/HDPE/wood powder polymer blend composites.
(
Elsevier
, 2017 , Article)
The morphology and properties of blends of PP/HDPE and MAPP/HDPE blends, and their composites with wood
powder, were investigated in this paper. The blends showed two-phase morphologies, and MAPP interacted
better than ...
Improvement of ternary recycled polymer blend reinforced with date palm fibre
(
Elsevier, Ltd
, 2014 , Article)
This paper investigates the study and preparation of date palm fibre reinforced recycled polymer blend composites. This is the first paper which describes the recycled polymer ternary blends of (1) recycled low density ...