Search
Now showing items 11-20 of 31
Quasi two-level PWM operation of a nine-arm modular multilevel converter for six-phase medium-voltage motor drives
(
Institute of Electrical and Electronics Engineers Inc.
, 2018 , Conference Paper)
This paper proposes a hybrid converter for medium-voltage six-phase machine drive systems that mixes the operation of a traditional two-level voltage-source inverter and the modular multilevel converter (MMC) to enable ...
Hybrid and modular multilevel converter designs for isolated HVDC-DC converters
(
Institute of Electrical and Electronics Engineers Inc.
, 2018 , Article)
Efficient medium and high-voltage dc-dc conversion is critical for future dc grids. This paper proposes a hybrid multilevel dc-ac converter structure that is used as the kernel of dc-dc conversion systems. Operation of the ...
An active damping approach for PR-based current control of grid-tied VSI with LCL filter
(
Institution of Engineering and Technology
, 2016 , Conference Paper)
The use of the Voltage Source Inverter (VSI) in Distributed Power Generation Systems (DPGS) and their connection to the utility network requires low pass filters which are typically used for grid current harmonic suppression. ...
An active-damped LLCL filter for grid-tied three-phase voltage source inverter with PR current control
(
Institution of Engineering and Technology
, 2016 , Conference Paper)
For the grid connection of voltage source inverters (VSIs), the power passive filters are a standard solution for grid-current harmonic attenuation. However, these types of filters may cause resonance between the inverter ...
The transition arm multilevel converter - A concept for medium and high voltage DC-DC transformers
(
Institute of Electrical and Electronics Engineers Inc.
, 2015 , Conference Paper)
This paper proposes a dc/ac converter topology where each phase leg comprises a conventional series switch valve in one arm and a series connection of half-bridge chopper cells in the other arm. Operation with trapezoidal ...
Quasi two-level operation of modular multilevel converter for use in a high-power DC transformer with DC fault isolation capability
(
Institute of Electrical and Electronics Engineers Inc.
, 2015 , Article)
DC fault protection is one challenge impeding the development of multiterminal dc grids. The absence of manufacturing and operational standards has led to many point-to-point HVDC links built at different voltage levels, ...
An LCL filter-based grid-interfaced three-phase voltage source inverter: Performance evaluation and stability analysis
(
Institution of Engineering and Technology
, 2014 , Conference Paper)
Power converters in grid connection applications commonly employ Sinusoidal Pulse-Width Modulation (SPWM) technique. Passive filters are employed in order to attenuate the generated switching current ripples and reduces ...
A single-stage three-phase inverter based on cuk converters for PV applications
(
Institute of Electrical and Electronics Engineers Inc.
, 2014 , Conference Paper)
This paper presents a new three-phase inverter based on the Cuk converter. The main feature of the proposed topology is that the energy storage elements, such as inductors and capacitors, can be reduced in order to improve ...
Capacitor voltage balancing using redundant states of space vector modulation for five-level diode clamped inverters
(
IEEE
, 2010 , Article)
A redundancy balancing technique for the five-level diode-clamped inverter is presented, which balances the four dc-link capacitor voltages at high modulation index and high power factor. The technique is based on dividing ...
Inverter-based versus synchronous-based distributed generation; Fault current limitation and protection issues
(
IEEE
, 2010 , Conference Paper)
The contribution of distributed generation (DG) to network fault levels depends heavily on the technology employed. In the case of directly connected rotating machines the fault behavior is well established; with synchronous ...