تصفح Chemical Engineering حسب العنوان
السجلات المعروضة 526 -- 545 من 1131
-
Improved salt removal and power generation in a cascade of two hydraulically connected up-flow microbial desalination cells
( Taylor and Francis Inc. , 2018 , Article)A novel two chamber up-flow microbial desalination cell (UMDC) was designed for evaluating desalination of real seawater with simultaneous wastewater treatment and energy generation. Two UMDCs were hydraulically connected ... -
Improving biogas production from agricultural waste by photo-Fenton process
( AIChE , 2018 , Conference Paper)The Study investigates the enhancement of biogas production from a mixture of agricultural solid waste, wastewater and manure by Photo-Fenton prices process. The effect of the total solids, organic content, nutrient and ... -
Improving the efficiency of dye sensitized solar cells by TiO2-graphene nanocomposite photoanode
( Elsevier B.V. , 2015 , Article)Nanocomposite photoanodes were prepared by addition of graphene (GR) micro-platelets to TiO2 nanoparticulate paste. TiO2/graphene based DSSCs were fabricated using Z907 photosensitizer. Transmission electron microscope was ... -
Improving the Performance of Attached-Growth Wastewater Treatment Processes by Altering the Support Media Surface
( American Society of Civil Engineers (ASCE) , 2019 , Article)This study investigated the impact of altering the surface characteristics of support media used in attached-growth processes on the performance of biological wastewater treatment. The surface alteration was achieved through ... -
In situ DRIFTS Studies on Cu, Ni and CuNi catalysts for Ethanol Decomposition Reaction
( Springer New York LLC , 2016 , Article)Catalyst nanopowders containing copper and nickel were synthesized using solution combustion synthesis method for hydrogen production from ethanol decomposition. Detailed in situ DRIFTS studies were conducted on three ... -
In situ electron microscopy of Braille microsystems: Photoactuation of ethylene vinyl acetate/carbon nanotube composites
( Institute of Physics Publishing , 2015 , Article)The development of new types of tactile displays based on the actuation of composite materials can aid the visually impaired. Micro/nano systems based on ethylene vinyl acetate (EVA) polymeric matrices enriched with ... -
In situ XAS and FTIR studies of a multi-component Ni/Fe/Cu catalyst for hydrogen production from ethanol
(2013 , Article)Multicomponent catalysts containing Ni, Fe, Cu active for ethanol reforming reactions, prepared by solution combustion synthesis are characterized by multiple techniques such as ex situ XRD, XPS, and in situ XAFS and FTIR. ... -
Induced bioelectrochemical metabolism for bioremediation of petroleum refinery wastewater: Optimization of applied potential and flow of wastewater
( Elsevier Ltd , 2018 , Article)Hybrid based bioelectrochemical system (BES) configured with embedded anode and cathode electrodes in soil was tested for the bioelectrochemical degradation of petroleum refinery wastewater (PRW). Four applied potentials ... -
Industrial case studies in the petrochemical and gas industry in Qatar for the utilization of industrial waste heat for the production of fresh water by membrane desalination
( Taylor and Francis Inc. , 2013 , Article)An investigation into the potential of using industrial low-grade waste heat in desalination using membrane distillation (MD) has been carried out. This investigation highlighted the need to work on fresh water production ... -
Industrial effluent treatment with immersed MBRs: Treatability and cost
( IWA Publishing , 2019 , Article)A comprehensive OPEX analysis for both municipal and industrial wastewaters has been conducted encompassing energy, critical component (membrane) replacement, chemicals consumption, waste disposal and labour. The analysis ... -
Influence of adhesive thickness and filler content on the mechanical performance of aluminum single-lap joints bonded with aluminum powder filled epoxy adhesive
( Elsevier B.V. , 2007 , Article)The objective of this study was to develop information on the influence of adhesive thickness and aluminum filler content on the mechanical performance of aluminum joints bonded by aluminum powder filled epoxy. The adhesive ... -
Influence of carbon uniformity on its characteristics and adsorption capacities of CO2 and CH4 gases
( MDPI AG , 2021 , Article)Activated carbons of resorcinol-formaldehyde aerogels (AC-RFA) were prepared and mixed with multiwall carbon nanotubes (MWCNTs) with various ratios. Samples were characterized by different techniques. The novelty of the ... -
Influence of casting solvents on co2/ch4 separation using polysulfone membranes
( MDPI AG , 2021 , Article)Polysulfone membranes exhibit resistance to high temperature with low manufacturing cost and high efficiency in the separation process. The composition of gases is an important step that estimates the efficiency of separation ... -
Influence of chitosan addition on resorcinol-formaldehyde xerogel structure
( MDPI AG , 2019 , Article)Gels are usually not environment-friendly due to their difficult biodegradability. Therefore, the addition of chitosan, even in small amounts, will make such gels biodegradable and thus can be useful in many applications ... -
Influence of choline chloride based natural deep eutectic solvent on the separation and rheological behavior of stable bentonite suspension
( Elsevier B.V. , 2021 , Article)Colloids in wastewater are considered a serious problem due to their stability and separation difficulty. Coagulation/ flocculation processes are the most common for the separation of colloids because of their high-performance ... -
Influence of combined natural deep eutectic solvent and polyacrylamide on the flocculation and rheological behaviors of bentonite dispersion
( Elsevier , 2022 , Article)The influence of hybrid coagulation/ flocculation systems on the degree of flocculation and rheological behavior of highly stable bentonite suspension has been investigated throughout this study. Natural deep eutectic ... -
Influence of composite particle formation on the performance and economics of grit removal
( Elsevier Ltd , 2017 , Article)Grit is routinely removed at the headworks of municipal wastewater treatment works to limit its onerous impact on downstream processes. Grit separation technologies are normally based on sedimentation of a homogeneous ... -
Influence of doped metal center on morphology and pore structure of ZIF-8
( Cambridge University Press , 2019 , Article)Synthesis of ZIF with zinc, cobalt, or copper was carried out by microwaves. The effect of metal center on morphologies and pores of products was studied. Nitrogen adsorption/desorption onto ZIFs was examined by density ... -
Influence of draw solution type and properties on the performance of forward osmosis process: Energy consumption and sustainable water reuse
( Elsevier Ltd , 2019 , Article)Single and multi-component fertilizers were used as a draw solution (DS) in forward osmosis (FO) to produce high-quality water from synthetic and seawater solution, eliminating the need for DS regeneration and reducing the ... -
Influence of fuel ratio on the performance of combustion synthesized bifunctional cobalt oxide catalysts for fuel cell application
( Elsevier Ltd , 2019 , Article)Solution combustion synthesis was used to prepare cobalt oxide nanoparticles at different fuel ratio (φ = 0.5, 1, and 1.75). The synthesized particles were characterized using XRD, SEM, TEM, FTIR and XPS to study the ...