Browsing by Author "Abdullah, Aboubakr"
Now showing items 1-9 of 9
-
Cerium dioxide nanoparticles as smart carriers for self-healing coatings
Habib, Sehrish; Fayyad, Eman; Nawaz, Muddasir; Khan, Adnan; Shakoor, Rana A.; Kahraman, Ramazan; Abdullah, Aboubakr... more authors ... less authors ( MDPI AG , 2020 , Article)The utilization of self-healing cerium dioxide nanoparticles (CeO2), modified with organic corrosion inhibitors (dodecylamine (DDA) and n-methylthiourea (NMTU)), in epoxy coating is an efficient strategy for enhancing the ... -
Development of in-situ sensors for CO2 to fuel process
Houkan, Mohammad; Shehata, Omar; Kannan, Karthik; Cabibihan, John-John; M. Abdullah, Aboubakr; Sadasivuni, Kishor Kumar... more authors ... less authors ( Qatar University Press , 2020 , Poster)Conversion of CO2 into fuel is an interesting and promising field. However, the conversion yield is hard to measure during the conversion process. Here, we have developed two techniques to measure the amount of CO2 while ... -
The Effect of Aluminium Dross on Mechanical and Corrosion Properties of Concrete
Ozerkan, Nesibe; Maki, Omar; Anayeh, Momen; Tangen, Stian; M. Abdullah, Aboubakr ( OMICS International , 2014 , Article)It is the objective of this project is to investigate the mechanical and chemical behaviour of new concrete type obtained by adding aluminium dross which is an impure aluminium mixture that results from metals melting and ... -
Enhancement Of Water-oil Separation By Electroclescence
Vivacqua, Vincenzino; Mhatre, Sameer; Ghadiri, Mojtaba; Abdullah, Aboubakr; Hassanpour, Ali; Al-marri, Mohammed; Azzopardi, Barry; Hewakandamby, Buddhika; Kermani, Bijan... more authors ... less authors ( Hamad bin Khalifa University Press (HBKU Press) , 2014 , Conference Paper)Dispersed water droplets in organic liquids are commonly encountered in the oil, chemical and biochemical industries. A typical example is the separation of dispersed water drops in crude oil, in order to prevent catalyst ... -
High electrocatalytic performance of nitrogen-doped carbon nanofiber-supported nickel oxide nanocomposite for methanol oxidation in alkaline medium
Al-Enizi, bdullah M.; Elzatahry, Ahmed A.; M. Abdullah, Aboubakr; Vinu, Ajaya; Iwai, Hideo; Al-Deyab, Salem S.... more authors ... less authors ( Elsevier B.V. , 2017 , Article)Nitrogen-Doped Carbon Nanofiber (N-CNF)–supported NiO composite was prepared by electrospinning a sol-gel mixture of graphene and polyaniline (PANi) with aqueous solutions of Polyvinylpyrrolidone (PVP) followed by a ... -
Improved self-healing performance of polymeric nanocomposites reinforced with talc nanoparticles (TNPs) and urea-formaldehyde microcapsules (UFMCs)
Sehrish, Habib; Fayyed, Eman; Shakoor, Rana Abdul; Kahraman, Ramazan; Abdullah, Aboubakr ( Elsevier B.V. , 2021 , Article)The present work reports the self-healing performance of the epoxy based polymeric nanocomposite coatings containing different concentrations (1 and 3 wt%) of talc nanoparticles (TNPs) modified with sodium nitrate (NaNO3), ... -
Investigation of the mechanical behavior of electroless Ni-P-Ti composite coatings
Li, Zhi; Farhat, Zoheir; Jarjoura, George; Fayyad, Eman; Abdullah, Aboubakr; Hassan, Mohammad... more authors ... less authors ( American Society of Mechanical Engineers (ASME) , 2020 , Article)To improve the toughness of Ni-P coatings, NiTi superelastic particles were introduced into the Ni-P matrix through the electroless co-depositing of Ni-P and Ti particles and annealing Ni-P-Ti coatings. The mechanical ... -
Synthesis and Characterization of Scratch-Resistant Ni-P-Ti-Based Composite Coating
Li, Zhi; Farhat, Zoheir; Jarjoura, George; Fayyad, Eman; Abdullah, Aboubakr; Hassan, Mohammad... more authors ... less authors ( Taylor and Francis Inc. , 2019 , Article)In order to improve the toughness of Ni-P coatings, Ti particles were introduced into the plating solution to produce a Ni-P-Ti composite coating (on API-X100 steel), which was subsequently annealed to form superelastic ... -
Synthesizing New Anodes From Qatalum's 1st Cut Spl
Hani Holozadah, Abdullah; Abdullah, Aboubakr; Odeh, Mufeed; Devadas, , Chris ( Hamad bin Khalifa University Press (HBKU Press) , 2014 , Conference Paper)Aluminum industry produces hundreds of tons of spent pot lining (SPL) waste every year. SPL is classified into two types: 1st cut and 2nd cut. The 1st cut SPL which is the material under study in this work is mainly composed ...