Show simple item record

AuthorCristancho, Diego E.
AuthorMatilla, Ivan D.
AuthorEjaz, Saquib
AuthorHall, Kenneth R.
AuthorAtilhan, Mert
AuthorIglesia-Silva, Gustavo A.
Available date2010-02-17T08:34:19Z
Publication Date2010-01-10
Publication NameJournal of Chemical & Engineering Data
CitationAccurate PρT Data for Methane from (300 to 450) K up to 180 MPa, Diego E. Cristancho, Ivan D. Mantilla, Saquib Ejaz, Kenneth R. Hall, Mert Atilhan, and Gustavo A. Iglesia-Silva, Journal of Chemical & Engineering Data 2010 55 (2), 826-829
URIhttp://hdl.handle.net/10576/10647
URIhttp://dx.doi.org/10.1021/je9004849
AbstractThis paper reports PFT data measured with a high-pressure, single-sinker, magnetic-suspension densimeter (MSD) from (300 to 450) K up to 180 MPa. Our MSD technique yields accurate data, with less than 0.05 % relative uncertainty, over the pressure range of (10 to 200) MPa. The experimental data compare well to the Setzmann and Wagner equation of state as implemented in RefProp 8.0. These methane density data are consistent with the low range of pressure predicted by RefProp 8.0 that has a relative uncertainty of 0.03 % up to 12 MPa and 0.07 % up to 50 MPa. The density predictions of this model agree well with previous data at higher pressures. The equation predicts data with almost the same uncertainty as the experimental data up to 180 MPa. These PFT data also allow reliable determination of both second and third virial coefficients.
Languageen
PublisherAmerican Chemical Society
SubjectDensity of gas
Metane
Mert Atilhan
Magnetic Suspension Densimeter
TitleAccurate PpT Data for Methane from (300 to 450) K up to 180 MPa
TypeArticle
dc.accessType Open Access


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record