Show simple item record

AuthorAhmed S.
AuthorShaffer J.
AuthorHarris J.
AuthorPham M.
AuthorDaniel A.
AuthorChowdhury S.
AuthorAli A.
AuthorBanerjee S.
Available date2020-03-18T10:47:16Z
Publication Date2019
Publication NameSuperlattices and Microstructures
ResourceScopus
ISSN7496036
URIhttp://dx.doi.org/10.1016/j.spmi.2019.04.017
URIhttp://hdl.handle.net/10576/13422
AbstractWe have simulated the operation and functionality of a working Sn-based perovskite solar cell device using GPVDM and compared it against a Pb-based device. The results are extremely promising in that they showcase comparable cell efficiencies, with the Sn-based device showing a highest 21.3% efficiency (Jsc of 332.8 A/m 2 , Voc of 0.839 V, FF of 0.764) compared to 23.4% of its Pb counterpart (Jsc of 349.3 A/m 2 , Voc of 0.811 V, FF of 0.828), at similar active layer thicknesses. A deeper study of each of the Jsc, Voc and FF trends provide keen insight into charge transfer kinetics within the device, paving the way to optimal experimental setups for fabricating the most efficient non-toxic perovskite devices.
SponsorThis work was supported by the Clean Energy Grant from SUNY - Buffalo State, United States .
Languageen
PublisherAcademic Press
SubjectFilm-thickness
GPVDM
Lead
Perovskite
Simulation
Tin
TitleSimulation studies of non-toxic tin-based perovskites: Critical insights into solar performance kinetics through comparison with standard lead-based devices
TypeArticle
Pagination20-27
Volume Number130
dc.accessType Abstract Only


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record