Show simple item record

AuthorSobolčiak P.
AuthorTanvir A.
AuthorSadasivuni K.K.
AuthorKrupa I.
Available date2020-04-05T10:53:23Z
Publication Date2019
Publication NameSensors (Switzerland)
ResourceScopus
ISSN14248220
URIhttp://dx.doi.org/10.3390/s19204589
URIhttp://hdl.handle.net/10576/13844
AbstractThe preparation methodology and properties of electroconductive, electrospun mats composed of copolyamide 6,10 and Ti3C2Tx are described in this paper. Mats of several compositions were prepared from a solution of n-propanol. The obtained electrospun mats were then tested as piezoresistive sensors. The relative resistance (AR) of the sensor increased with an increase in the Ti3C2Tx content, and materials with relatively higher electrical conductivity displayed noticeably higher sensitivity to applied pressure. The pressure-induced changes in resistivity increased with an increment in the applied force. - 2019 by the authors. Licensee MDPI, Basel, Switzerland.
SponsorFunding: This publication was supported by Qatar University Collaborative High Impact Grant QUHI-CENG-18/19-1. The findings accomplished here in are solely the responsibility of the authors.
Languageen
PublisherMDPI AG
SubjectCopolyamide
Electrospun nanofibers
MXene
Pressure sensor
TitlePiezoresistive sensors based on electrospun mats modified by 2D Ti3C2Tx MXene
TypeArticle
Issue Number20
Volume Number19
dc.accessType Open Access


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record