Internal transverse reinforcement configuration effect of EB/NSE-FRCM shear strengthening of RC deep beams
المؤلف | Wakjira, Tadesse G. |
المؤلف | Ebead, Usama |
تاريخ الإتاحة | 2020-05-14T09:55:46Z |
تاريخ النشر | 2019 |
اسم المنشور | Composites Part B: Engineering |
المصدر | Scopus |
الرقم المعياري الدولي للكتاب | 13598368 |
الملخص | This paper presents an experimental study carried out on the structural performance of shear-critical reinforced concrete (RC) deep beams internally reinforced with two different stirrups configurations; i.e. aligned and unaligned with the fabric-reinforced cementitious matrix (FRCM) strips. The test matrix involved two unstrengthened (reference) beams and twelve strengthened deep beams tested under three-point bending. Three test variables were investigated: (a) the configuration of the internal transverse reinforcement (ITR), (b) the type of FRCM fabric (carbon, glass, and polyparaphenylene benzobisoxazole, PBO), and (c) the strengthening technique (externally bonded, EB, and near-surface embedded, NSE). Experimental results demonstrated an effective application of the FRCM in improving the load capacities (P max ) of deep beams; however, its performance depends on the test variables. The NSE-FRCM provided an inherent anchorage that prevented the premature debonding of the FRCM composite, which was a standard failure mode in the externally bonded FRCM strengthened beams. Finally, a simple strut and tie model (STM) is used to predict the load capacities of the deep beams strengthened with different FRCM systems and resulted in a satisfactory prediction with an average P th /P ex ratio of 1.11 and a standard deviation of 5.7%. - 2019 Elsevier Ltd |
راعي المشروع | This paper was made possible by NPRP grant # NPRP 7-1720-2-641 from the Qatar National Research Fund (a member of Qatar Foundation) and by Qatar University grants number QUST-CENG-SPR-13/14 and QUST-CENG-SPR-14/15-15 . The findings achieved herein are solely the responsibility of the authors. Appendix A |
اللغة | en |
الناشر | Elsevier Ltd |
الموضوع | Analytical modeling Fabric-reinforced cementitious matrix (FRCM) Fabrics/textiles Mechanical testing Shear strengthening Strength |
النوع | Article |
الصفحات | 758-772 |
رقم المجلد | 166 |
تحقق من خيارات الوصول
الملفات في هذه التسجيلة
الملفات | الحجم | الصيغة | العرض |
---|---|---|---|
لا توجد ملفات لها صلة بهذه التسجيلة. |
هذه التسجيلة تظهر في المجموعات التالية
-
الهندسة المدنية والمعمارية [767 items ]