Show simple item record

AuthorUbaid, Fareeha
AuthorMatli, Penchal Reddy
AuthorShakoor, Rana Abdul
AuthorParande, Gururaj
AuthorManakari, Vyasaraj
AuthorMohamed, Adel Mohamed Amer
AuthorGupta, Manoj
Available date2020-08-27T10:08:52Z
Publication Date2017
Publication NameMaterials
ResourceScopus
ISSN19961944
URIhttp://dx.doi.org/10.3390/ma10060621
URIhttp://hdl.handle.net/10576/15776
AbstractIn this work, Al-B4C nanocomposites were produced by microwave sintering and followed by hot extrusion processes. The influence of ceramic reinforcement (B4C) nanoparticles on the physical, microstructural, mechanical, and thermal characteristics of the extruded Al-B4C nanocomposites was investigated. It was observed that the density decreased and porosity increased with an increase in B4C content in aluminum matrix. The porosity of the composites increased whereas density decreased with increasing B4C content. Electron microscopy analysis reveals the uniform distribution of B4C nanoparticles in the Al matrix. Mechanical characterization results revealed that hardness, elastic modulus, compression, and tensile strengths increased whereas ductility decreases with increasing B4C content. Al-1.0 vol. % B4C nanocomposite exhibited best hardness (135.56 Hv), Young's modulus (88.63 GPa), and compression/tensile strength (524.67/194.41 MPa) among the materials investigated. Further, coefficient of thermal expansion (CTE) of composites gradually decreased with an increase in B4C content.
Languageen
PublisherMDPI AG
SubjectAl-B4C nanocomposites
Hot extrusion
Mechanical properties
Microwave sintering
Thermal expansion
TitleUsing B4C nanoparticles to enhance thermal and mechanical response of aluminum
TypeArticle
Issue Number6
Volume Number10
dc.accessType Open Access


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record