PbS/CdS heterojunction quantum dot solar cells
Abstract
The present work investigates the effects of combination of lead sulfide PbS quantum dots and cadmium sulfide CdS nanoparticles (NPs), with n-type and p-type semiconductors, on the photovoltaic performance of heterojunction solar cells. Namely, p-type semiconductors are: poly[3,4-ethylenedioxythiophene]–poly[styrenesulfonate] (PEDOT:PSS), copper oxide (CuO) NPs and graphene oxide (GO); while n-type semiconductors are: zinc oxide (ZnO) NPs and titanium dioxide (TiO2) NPs. The above were used to fabricate heterojunction solar cell structures via spin coating, chemical bath deposition and SILAR cycle methods. The morphology and energy band diagram for each solar cell were examined. The photovoltaic performance of the cells was measured under 1 sun illumination (irradiation of 100 mW/cm2). This efficiency ranged between 0.388 and 5.04 %. The solar cell with FTO/ZnO/TiO2/CdS/PbS/PEDOT:PSS/Au structure and optimum layers’ thickness exhibited a short-circuit current of 24.2 mA/cm2, open circuit voltage of 544 mV, a fill factor of 38.2 % and a power conversion efficiency of 5.04 % with reliably good stability. This is related to the uniform surface morphology throughout every cell layer without voids, pinholes or cracks. Furthermore, gradual band energy levels alignment of n-type and p-type NPs (CdS/PbS), as well as high hole mobility of PEDOT:PSS and the high electron affinity of ZnO and TiO2 are other major factors that controls quantum efficiency.
Collections
- Mathematics, Statistics & Physics [722 items ]
Related items
Showing items related by title, author, creator and subject.
-
Optimal design and operation of conventional, solar electric, and solar thermal district cooling systems
Alghool, Dana M.; ElMekkawy, Tarek Y.; Haouari, Mohamed; Elomri, Adel ( John Wiley and Sons Ltd , 2022 , Article)This research investigates the integration of solar energy with traditional cooling technologies using solar electric cooling systems. A holistic optimization process is introduced to enable the cost-effective design of ... -
Thermoeconomic Analysis of a Solar-Assisted Industrial Process Heating System
Kumar, Laveet; Hasanuzzaman, M.; Rahim, N. A.; Sleiti, Ahmad K. ( Wiley-Hindawi , 2024 , Article)Thermal energy in the industrial sector for process heating applications in the range of 50 to 250°C consumes about 35% of the global fossil fuel. Cascaded solar thermal systems are promising solutions to meet clean and ... -
Effect of fin configuration parameters on performance of solar still: A review
Mevada, D.; Panchal, H.; Sadasivuni, Kishor Kumar; Israr, M.; Suresh, M.; Dharaskar, S.; Thakkar, H.... more authors ... less authors ( Elsevier B.V. , 2020 , Article)Drinking water is a necessity not only for humanity but also for the all living organisms available in the earth today. But the availability of the potable water is not in abundant amount; hence clean water is scarce in ...