Show simple item record

AuthorShrestha, K.C.
AuthorEbead, U.
AuthorYounis, A.
Available date2021-06-08T11:35:18Z
Publication Date2017
Publication NameISEC 2017 - 9th International Structural Engineering and Construction Conference: Resilient Structures and Sustainable Construction
ResourceScopus
URIhttp://dx.doi.org/10.14455/isec.res.2017.161
URIhttp://hdl.handle.net/10576/20551
AbstractTextile reinforced mortar (TRM) is applied on the concrete surface with the aim of strengthening reinforced concrete structures. The performance of the strengthened structural system is directly related to the bond between the existing concrete substrate and the freshly applied TRM layer. This paper presents the results of an experimental study carried out to investigate the significance of concrete surface preparation, performed prior to strengthening, on the bonding behavior of the TRM system. For this purpose, concrete slabs of size (500 mm � 500 mm � 100 mm) were prepared and strengthened using a 10-mm thick TRM layer. After that, the bond performance of the strengthening layer with the concrete slab was assessed using the pull-off test. Three different levels of surface roughening were considered before strengthening: (i) no roughening (regarded as the reference), (ii) low roughening level, and (iii) high roughening level. Two types of textile materials are used in strengthening systems: carbon and polyparaphenylene benzobisoxazole (PBO). A total number of 72 pull-off tests were performed, of which the results were analyzed to examine the significance of the test variables. Results revealed that as the concrete surface is more roughened before strengthening, the bond between concrete substrate and TRM layer becomes stronger. Moreover, the PBO-TRM systems exhibit more desirable bonding behavior compared to the carbon-TRM counterpart.
SponsorThis paper was made possible by Internal grant # QUST-CENG-SPR-14/15-16 from Qatar University. The findings achieved herein are solely the responsibility of the authors.
Languageen
PublisherISEC Press
SubjectBond characteristics.
Level of roughening
Pull-off test
Rehabilitation
Repair
Structures
TitleEffect of surface roughening on concrete/trm bond
TypeConference Paper
dc.accessType Abstract Only


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record