Enhancing oil removal from water using ferric oxide nanoparticles doped carbon nanotubes adsorbents
عرض / فتح
التاريخ
2016المؤلف
Fard, Ahmad KayvaniRhadfi, Tarik
Mckay, Gordon
Al-marri, Mohammed
Abdala, Ahmed
Hilal, Nidal
Hussien, Muataz A.
...show more authors ...show less authors
البيانات الوصفية
عرض كامل للتسجيلةالملخص
Oil contaminated water is one of the challenges in water resources management. It is crucial to remove the oil droplets from water in order to meet the discharge regulations set by the environmental authorities. Carbon nanotubes (CNTs) have generated a lot of attention as a new type of adsorbent due to their exceptionally high adsorption capacity for oil-water separation. The high hydrophobicity of CNTs makes them good candidates to enhance the de-oiling process from wastewater. In this study, we have reported the synthesis and evaluation of novel iron-oxide/CNTs nanocomposites for oil-water separation. The CNTs were doped with different loadings of iron oxide nanoparticles using a wet impregnation technique. The synthesized nanocomposite nanomaterials were characterized using field emission scanning electron microscopy (FE-SEM), high resolution transmission electron microscopy (TEM), Brunauer, Emmett and Teller (BET) technique, X-ray diffraction (XRD), and thermogravimetric analysis (TGA). The effect of adsorption parameters, including, adsorbent dosage, contact time, and agitation speed on the oil removal efficiency were optimized using batch experiments. The sorption capacities of doped CNTs were found to be greater than 7 g/g for gasoline oil. The doped CNTs reached maximum sorption capacity after only 15 min providing one of the fastest minimum contact times reported of all oil sorbent materials. The loading of Fe2O3 nanoparticles on the negative surface of CNT decreases the negative sign and magnitude of the zeta potential by overcoming the repulsive effects of the electrical double layers to allow the finely sized oil droplets to form larger droplets through coalescence. Therefore increasing percentage of the Fe2O3 on the surface of CNT increased the removal of the emulsified oil from the water. 2016 Elsevier B.V.
المجموعات
- الأبحاث [494 items ]
وثائق ذات صلة
عرض الوثائق المتصلة بواسطة: العنوان، المؤلف، المنشئ والموضوع.
-
A NEW APPROACH FOR WATER PURIFICATION USING GREEN NANOPARTICLES FABRICATED FROM THE LIME PEEL AS SILVER/COPPER NANOPARTICLES FOR THE "BISPHENOL A" REMEDIATION
ALKHAIR, SHAHAD MOHAMMED HAMZA (2024 , Master Thesis)One of the most common endocrine-disrupting compounds (EDCs) in the environment is bisphenol A (BPA), which has been linked to various chronic diseases. In light of these concerns, green synthesis of nanoparticles from ... -
Optimization of magnetic nanoparticles draw solution for high water flux in forward osmosis
Hafiz, Mhdammar; Talhami, Mohammed; Ba-Abbad, Muneer M.; Hawari, Alaa H. ( MDPI , 2021 , Article)In this study, bare iron oxide nanoparticles were synthesized using a co-precipitation method and used as a draw solute in forward osmosis. The synthesis conditions of the nanoparticles were optimized using the Box-Behnken ... -
Green synthesized zinc oxide nanoparticles for removal of carbamazepine in water and soil systems
Sajid, Mehmood; Ahmed, Waqas; Rizwan, Muhammad; Bundschuh, Jochen; Elnahal, Ahmed S.M.; Li, Weidong... more authors ... less authors ( Elsevier , 2024 , Article)During the COVID-19 pandemic, there was a significant increase in pharmaceutical releases (4 %), which created a pressing global need for solutions. In this study, we explored the use of zinc oxide nanoparticles (GS-ZnONPs) ...