تصفح Qatar University Young Scientists Center حسب تاريخ النشر
السجلات المعروضة 1 -- 20 من 202
-
Study of polyaniline-silver nanocomposite as humidity sensor
( Hamad bin Khalifa University Press (HBKU Press) , 2018 , Conference Paper)Study of polyaniline-silver nanocomposite as humidity sensor J. Bhadra, A. Popelka, N. J. Al-Thani, A. Abdulkareem Center for Advanced Materials, Qatar University, Qatar Abstract In this piece of work focus on fabrication ... -
Author Correction: Stretchable Electrospun PVDF-HFP/Co-ZnO Nanofibers as Piezoelectric Nanogenerators (Scientific Reports, (2018), 8, 1, (754), 10.1038/s41598-017-19082-3)
( Nature Research , 2019 , Other)In Figure 5, Co-ZnO was incorrectly given as Ni-ZnO. In addition, the line on the graph for PVDF-HFP was omitted. The correct Figure 5 appears below as Figure 1. (Figure presented.). -
Effect of sulfonated poly (ether ether ketone) on the sensitivity of polyvinylidene fluoride-based resistive humidity sensors
( Elsevier Ltd , 2020 , Article)We have investigated the effect of sulfonated poly (ether ether ketone) (SPEEK) on the thermal stability, hydrophilicity, and sensitivity of polyvinylidene fluoride (PVDF) films based resistive humidity sensors. The blended ... -
Improvement of capacitive humidity sensors using tris(8-hydroxyquinoline) gallium (Gaq3) nanofibers as a dielectric layer
( Springer , 2020 , Article)In this research work, we improved the sensing response of the organic-based co-planar humidity sensors using tris(8-hydroxyquinoline) gallium (Gaq3) nanofibers as a dielectric material. The humidity sensor was fabricated ... -
Detection of voltage pulse width effect on charge accumulation in PSCs using EFISHG measurement
( Elsevier , 2020 , Article)We report the effect of applied pulse width on charge accumulation in triple cation perovskite solar cells (PSCs) during the Electric Field Induced Second Harmonic Generation (EFISHG) measurements. The PSCs were prepared ... -
Performance optimization of CH3NH3Pb(I1-xBrx)3 based perovskite solar cells by comparing different ETL materials through conduction band offset engineering
( Elsevier , 2020 , Article)Numerical simulations can provide the physical insights into the carrier transport mechanism in the solar cells, and the factors influencing their performance. In this paper, perovskite solar cell (PSC) based on the mixed ... -
Metal halide-based photodetector using one-dimensional MAPbI3 micro rods
( Springer , 2020 , Article)In the present work, we report the fabrication of a photodetector using methylammonium lead iodide perovskite (MAPbI3) micro rod. Photosensitivity of the Ag/MAPbI3/Ag photodetector has been studied under various light ... -
Electrochemical impedance spectroscopy analysis of hole transporting material free mesoporous and planar perovskite solar cells
( MDPI , 2020 , Article Review)The future photovoltaic technologies based on perovskite materials are aimed to build low tech, truly economical, easily fabricated, broadly deployable, and trustworthy solar cells. Hole transport material (HTM) free ... -
Long-Term Stability Analysis of 3D and 2D/3D Hybrid Perovskite Solar Cells Using Electrochemical Impedance Spectroscopy
( MDPI , 2020 , Article)Despite the remarkable progress in perovskite solar cells (PSCs), their instability and rapid degradation over time still restrict their commercialization. A 2D capping layer has been proved to overcome the stability issues; ... -
QUYSC STEM Digilearning Model
( Qatar University Press , 2021 , Poster)Covid-19 and the unprecedented shift in educational delivery, has revealed multiple perforations in the science-learning pedagogies. The technological replacements for a physical presence of an instructor and peer collaborated ... -
Low-toxic, earth-abundant nanostructured materials for thermoelectric applications
( MDPI AG , 2021 , Article)This article presents recent research directions in the study of Earth-abundant, cost-effective, and low-toxic advanced nanostructured materials for thermoelectric generator (TEG) applications. This study’s critical aspect ... -
Humidity sensor based on poly(lactic acid)/PANI-ZnO composite electrospun fibers
( Royal Society of Chemistry , 2021 , Article)The electrospinning technique has been successfully used to prepared micro-fibers of the poly(lactic acid)/polyaniline–zinc oxide (PLA/PANI–ZnO) composite. The polyaniline–zinc oxide (PANI–ZnO) nanocomposites are synthesized ... -
A review of passivity breakdown on metal surfaces: influence of chloride- and sulfide-ion concentrations, temperature, and pH
( Springer Nature , 2021 , Article Review)Metals, including austenitic steels and alloys, have been extensively applied in industrial and engineering applications. Passive films on metal surfaces are very important for corrosion protection. However, localized ... -
Flexible piezoelectric nanogenerator based on [P(VDF-HFP)]/ PANI-ZnS electrospun nanofibers for electrical energy harvesting
( Springer , 2021 , Article)Abstract: Over the past decade, piezoelectric nanogenerator have attracted much attention to harvest mechanical energy from abundant resources in nature. Here, the ZnS microspheres is prepared by hydrothermal method and ... -
Development of Semitransparent UV Photodetector Based on PTB7-Th:PCBM Composite Using the Cost-effective Fabrication Method
( ESG , 2021 , Article)This article presents a semitransparent ultraviolet (UV) sandwich-surface type sensor based on PTB7-Th: PCBM composite. The ultraviolet (UV) transparency of 29% was achieved through a cost-effective drop-cast fabrication ... -
Covid-19 inspired a stem-based virtual learning model for middle schools—a case study of Qatar
( MDPI , 2021 , Article)An unprecedented turn in educational pedagogies due to the COVID-19 pandemic has significantly affected the students’ learning process worldwide. This article describes developing a STEM-based online course during the ... -
A STEM model to engage students in sustainable science education through sports: A case study in Qatar
( MDPI , 2021 , Article)Sports has the potential to integrate with different scientific subjects, including materials science and engineering, making it an ideal approach to enhance the students’ affinity toward sustainable education in science, ... -
Synthesis and characterization Al2O3-ZrO2 bio-nanostructures with sintering effect, residual and thermally stable analysis
( S.C. Virtual Company of Phisics S.R.L , 2021 , Article)The thermal stability of nano composite materials is the important aspect of the modern era. In the advance modern devices, the nanostructures and nano composite material are used for the biological and other applications. ... -
MAPbI3 Microrods-Based Photo Resistor Switches: Fabrication and Electrical Characterization
( MDPI , 2021 , Article)The current work proposed the application of methylammonium lead iodide (MAPbI3 ) perovskite microrods toward photo resistor switches. A metal-semiconductor-metal (MSM) configu-ration with a structure of silver-MAPbI3 ... -
Numerical simulation analysis towards the effect of charge transport layers electrical properties on cesium based ternary cation perovskite solar cells performance
( Elsevier , 2021 , Article)In the present study, the device modeling of inverted architecture based on ITO/HTL/perovskite absorber/ETL/Ag was performed using a one-dimensional solar cell capacitance simulation (SCAPS-1D) program. Initially, device ...