تصفح حسب الناشر
السجلات المعروضة 1 -- 20 من 31
-
Current trends and prospects in catalytic upgrading of lignocellulosic biomass feedstock into ultrapure biofuels
( Elsevier , 2023 , Article)Eco-friendly renewable energy sources have recommended as fossil fuel alternatives in recent years to reduce environmental pollution and meet future energy demands in various sectors. As the largest source of renewable ... -
Design and optimization of four-terminal mechanically stacked and optically coupled silicon/perovskite tandem solar cells with over 28% efficiency
( Elsevier , 2023 , Article)Silicon/perovskite tandem devices are believed to be a favorite contender for improving cell performance over the theoretical maximum value of single-junction photovoltaic (PV) cells. The present study evaluates the design ... -
Detection of voltage pulse width effect on charge accumulation in PSCs using EFISHG measurement
( Elsevier , 2020 , Article)We report the effect of applied pulse width on charge accumulation in triple cation perovskite solar cells (PSCs) during the Electric Field Induced Second Harmonic Generation (EFISHG) measurements. The PSCs were prepared ... -
Do research experience programs promote capacity building in Qatar: Investigating the trend and participation differences
( Elsevier , 2023 , Article)Research Experience programs (REPs) inspire students to pursue advanced degrees and shape their research career paths. Government and commercial organizations sponsor REPs to promote the capacity building of the country. ... -
Effect of cold and hot compactions on corrosion behavior of p- and n-type bismuth telluride-based alloys developed through microwave sintering process
( Elsevier , 2023 , Article)Bismuth Telluride (BiTe) based p-type and n-type alloys exhibit superior thermoelectric (TE) performance covering energy requirements for specialized and home utilization. The main challenge nowadays is the sustainability ... -
Effect of illumination and applied potential on the electrochemical impedance spectra in triple cation (FA/MA/Cs) 3D and 2D/3D perovskite solar cells
( Elsevier , 2021 , Article)Even though there has been numerous works performed based on electrochemical impedance spectroscopy (EIS) of perovskite solar cells (PSCs), however, many aspects of the obtained EI spectra are yet to be fully grasped. ... -
Efficient solar energy harvesting via thermally stable tungsten-based nanostructured solar thermophotovoltaic systems
( Elsevier , 2024 , Article)Electromagnetic radiations are a key energy source, which, by deploying bandgap-engineered devices, are directed onto PV cells to maximize their utilization. In this regard, the Solar Thermophotovoltaic (STPV) systems are ... -
Engineering the structural, optical and photoelectrochemical properties of BaTiO3-CoFe2O4 nanocomposite for photoelectrochemical water splitting
( Elsevier , 2023 , Article)Water splitting in the presence of semiconductor photocatalyst under sunlight illumination is one of the potential methods to produce clean hydrogen fuel. Herein, a BaTiO3-CoFe2O4 composite photocatalyst was fabricated ... -
Enhancement of photovoltaic module performance by thermal management using shape-stabilized PCM composites
( Elsevier , 2024 , Article)Thermal management of photovoltaic (PV) panels is crucial due to the deterioration of their electrical efficiency at elevated operating temperatures. Therefore, thermal protection of PV against overheating is highly required. ... -
Exploring of the gender variations in 4Cs skills among primary students
( Elsevier , 2024 , Article)The development of 21st-century learning skills must prioritize collaborative problem-solving abilities. These include critical thinking, creativity, cooperation, and communication (4Cs) and the gender-based difference in ... -
Hierarchical BaTiO3/NiFe2O4 nanocomposite as an efficacious photoanode for photoelectrochemical water splitting
( Elsevier , 2022 , Article)Photocatalysis of water for the production of oxygen and hydrogen is one of the most important development in the drive for clean energy, and it has received a lot of attention because it is a green and easy step to generate ... -
High school students' STEM interests and career aspirations in Qatar: An exploratory study
( Elsevier , 2023 , Article)This study sought to explore high school students' interest in science, technology, engineering, and mathematics (STEM) related disciplines and careers in the context of Qatar. Quantitative data was collected using a survey ... -
Ion-imprinted membranes for lithium recovery: A review
( Elsevier , 2024 , Article)This review critically examines the effectiveness of ion-imprinted membranes (IIMs) in selectively recovering lithium (Li) from challenging sources such as seawater and brine. These membranes feature customized binding ... -
Mechanical and corrosion characteristics of TiC reinforced Ni-P based nanocomposite coatings
( Elsevier , 2023 , Article)The requirement for effective corrosion protection and better mechanical properties in various industries employing metal components has led to the growth of nickel (Ni)-based metallic coatings. The electroless-synthesized ... -
Microstructure and mechanical properties of aluminum matrix composites with bimodal-sized hybrid NbC-B4C reinforcements
( Elsevier , 2022 , Article)Aluminum (Al) is an earth-abundant metal recognized with superior properties for vital applications in the aerospace and transportation industries. Structural components of Al exhibit poor performance due to its inherent ... -
A numerical approach to study the effect of bandgap and electron affinity in HTL-free perovskite solar cells and design of two-terminal silicon/perovskite tandem solar cell
( Elsevier , 2023 , Article)The hole-transport layer (HTL) free perovskite solar cells with carbon electrode (c-PSCs) have garnered significant attention owing to their simple design, cost-effectiveness, and good stability. However, the power conversion ... -
Numerical modeling and performance optimization of carbon-based hole transport layer free perovskite solar cells
( Elsevier , 2022 , Article)Owing to low production cost and ease of processing, hole-transport layer (HTL) free carbon electrode-based perovskite solar cells (c-PSCs) have emerged as a potential photovoltaic (PV) technology. Despite this, c-PCSs ... -
Numerical simulation analysis towards the effect of charge transport layers electrical properties on cesium based ternary cation perovskite solar cells performance
( Elsevier , 2021 , Article)In the present study, the device modeling of inverted architecture based on ITO/HTL/perovskite absorber/ETL/Ag was performed using a one-dimensional solar cell capacitance simulation (SCAPS-1D) program. Initially, device ... -
Numerical simulation to optimize the efficiency of HTM-free perovskite solar cells by ETM engineering
( Elsevier , 2023 , Article)Perovskite solar cells based on carbon electrodes (c-PSCs) without a hole transport material (HTM) have gained considerable interest owing to their cost-effective and simplified structure. However, their application is ... -
Optimum sintering method and temperature for cold compact Bismuth Telluride pellets for thermoelectric applications
( Elsevier , 2021 , Article)This work intends to investigate the optimum sintering method and temperature that can improve the efficiency of bismuth telluride cold compact pellets, for the thermoelectric applications. Different p-type and n-type ...