عرض بسيط للتسجيلة

المؤلفLaad, M.
المؤلفPonnamma, D.
المؤلفSadasivuni, Kishor Kumar
تاريخ الإتاحة2022-03-23T06:54:40Z
تاريخ النشر2017
اسم المنشورInternational Journal of Applied Engineering Research
المصدرScopus
معرّف المصادر الموحدhttp://hdl.handle.net/10576/28697
معرّف المصادر الموحدhttps://mail.ripublication.com/ijaer17/ijaerv12n11_32.pdf?msclkid=f02e5bb7ae7c11ec9e7596893bd7867b
الملخصThis research study investigates the tribological behaviour of mineral based multi grade engine oil reinforced with nanoadditives using a pin on disc tribometer under different frictional conditions. Load, sliding speed, and constant sliding distance were selected as parameters to study the tribological properties of the engine oil with and without nanoadditives. Tests were carried under loads of 40N, 60N and 90N at sliding speeds 0.5 m/s, 1.0 m/s and 1.5 m/s. Nanoparticle concentration in the mineral oil was taken as 1.5 wt%. The test results were compared with engine oil with no nanoadditives. The results show significant improvement in the tribological properties of the engine oil. The wear of Aluminium alloy was observed to be increasing with increased value of the load. However the wear was significantly reduced for the same load when oil reinforced with nanoparticles was used. Wear rate for lubrication oil without nanoadditives was also found to be decreased with increase in sliding speed. Experimental results prove that nanoparticles can be used as a multifunctional additive in lubricating oil to enhance its tribological properties.
اللغةen
الناشرResearch India Publications
الموضوعEngine oil
Friction
Lubricant
Nanoadditives
Tribology
Wear rate
العنوانTribological studies of nanomodified mineral based multi-grade engine oil
النوعArticle
الصفحات2855-2861
رقم العدد11
رقم المجلد12
dc.accessType Abstract Only


الملفات في هذه التسجيلة

الملفاتالحجمالصيغةالعرض

لا توجد ملفات لها صلة بهذه التسجيلة.

هذه التسجيلة تظهر في المجموعات التالية

عرض بسيط للتسجيلة