Settling behavior of fine cuttings in fiber-containing polyanionic fluids for drilling and hole cleaning application
View/ Open
Publisher version (Check access options)
Check access options
Date
2021Author
Mahmoud H.Alhajabdalla M.
Nasser M.S.
Hussein I.A.
Ahmed R.
Karami H.
...show more authors ...show less authors
Metadata
Show full item recordAbstract
For efficient drilling operations, cuttings transport within the oil and gas wellbore is fundamental. Inadequate hole cleaning results in many problems including reduced rate of penetration, increased torque, bit wearing, and stuck pipe. The addition of fiber aids the cleaning performance of drilling sweep with a minor change in fluid rheology. However, our understanding of this complex fluid is very limited. Especially, the impact of polymer anionicity (solution negative charge density) on the hole cleaning performance of these fluids has not been investigated. The objective of this work is to examine the effect of anionicity and fiber on cutting carrying capacity of polymeric suspensions. This study presents results of an experimental study conducted on the settling behavior of fine cuttings in base fluids with the addition of polymers such as xanthan gum (XG), carboxymethyl cellulose (CMC), and polyanionic cellulose (PAC), and inert fibers. Moreover, the effect of cutting sizes (0.125 and 0.250 mm) was also assessed. Results showed that, in addition to the viscosity, the anionicity of base polymer influences the carrying capacity of the suspensions. The increase in anionicity improved the cutting carrying capacity of suspensions as indicated by Total Suspended Solids (TSS) measurements. The improvement of carrying capacity due to polymer anionicity is because of increased particle-particle and particle-polymer repulsion forces. Besides this, a small amount of fiber (0.08%) added to the base fluids enhanced the carrying capacity with minimal effect on fluid rheology. The enhancement due to fiber originates from the mechanical hindering effect of the fiber network and hydrodynamic interactions between cuttings and fibers. This study findings reveal that the hole cleaning performance of water-based drilling fluids with fine cuttings (0.063?0.500 mm) can be improved by increasing base fluid anionicity and adding fibers.
Collections
- Chemical Engineering [1141 items ]
- GPC Research [494 items ]
Related items
Showing items related by title, author, creator and subject.
-
Hole cleaning and drilling fluid sweeps in horizontal and deviated wells: Comprehensive review
Mahmoud H.; Hamza A.; Nasser M.S.; Hussein I.A.; Ahmed R.; Karami H.... more authors ... less authors ( Elsevier B.V. , 2020 , Article Review)Horizontal wells provide high drainage area within the reservoirs. Advancements in horizontal drilling technologies are utilized to develop unconventional resources such as shale gas and coal bed methane. However, wellbore ... -
Effect of Fluid Viscosity and Fiber Length on the Performance of Fibrous Fluid in Horizontal Well Cleanout
Mendez, Michael; Garcia, Sergio Prada; Ahmed, Ramadan; Karami, Hamidreza; Nasser, Mustafa; Hussein, Ibnelwaleed A.... more authors ... less authors ( Society of Petroleum Engineers (SPE) , 2023 , Article)During drilling, completion, and intervention operations, solids can deposit in the wellbore. Innovative cleanout fluids reduce the problems associated with inadequate hole cleaning. Various methods have been developed to ... -
Effects of Pipe Rotation on the Performance of Fibrous Fluids in Horizontal Well Cleanout
Garcia, Sergio; Mendez, Michael; Ahmed, Ramadan; Karami, Hamidreza; Nasser, Mustafa; Hussein, Ibnelwaleed... more authors ... less authors ( Society of Petroleum Engineers (SPE) , 2022 , Conference Paper)The deposition of rock cuttings is a problem commonly faced during drilling, completion, and intervention operations. Using polymer-based fluids is a common technique to improve horizontal downhole cleaning. However, these ...