عرض بسيط للتسجيلة

المؤلفMattli, Manohar Reddy
المؤلفKhan, Adnan
المؤلفMatli, Penchal Reddy
المؤلفYusuf, Moinuddin
المؤلفAshraf, A. Al-
المؤلفShakoor, R.A.
المؤلفGupta, Manoj
تاريخ الإتاحة2022-10-05T07:23:05Z
تاريخ النشر2020
اسم المنشورMaterials Today Communications
المصدرScopus
معرّف المصادر الموحدhttp://dx.doi.org/10.1016/j.mtcomm.2020.101564
معرّف المصادر الموحدhttp://hdl.handle.net/10576/34831
الملخصThis research work investigates the effect of concentration of Inconel625 particles on the microstructural, mechanical, and thermal properties of Al-Inconel625 composites. The Al-Inconel625 composites containing varying concentration Inconel625 particles (0 wt.%, 3 wt.%, 6 wt.%, and 9 wt.%) were prepared by the powder metallurgy method involving microwave sintering and hot extrusion techniques. The microstructural analysis reveals the incorporation and uniform distribution of Inconel625 particles in the Al matrix without noticeable agglomeration except at the final concentration (9 wt.%). Mechanical characterization indicates that the hardness, compressive strength and tensile strength of the prepared composites increases significantly with the increasing amount of Inconel625 particles in the Al matrix up to 6 wt.%. However, a declining trend of ductility is observed with an expanding concentration of Inconel625 content. The fractographic tests demonstrate a shear mode of fractures under compression loading, whereas a ductile fracture mode is prevalent under tensile loading. A liner reduction in the coefficient of thermal expansion of the Al-Inconel625 composites with an increasing amount of Inconel625 particles indicates their enhanced thermal and dimensional stability. The decent microstructural, mechanical, and thermal characteristics of Al-Inconel625 (6 wt.%) composites make them attractive for many industrial applications.
راعي المشروعThe authors are thankful to the Center for Advanced Materials (CAM), Qatar University, 2713, Doha, Qatar, for providing technical support. The authors are grateful to the Central Laboratory Unit (CLU) Qatar University, 2713, Doha, Qatar, for conducting the FE-SEM/EDS analysis.
اللغةen
الناشرElsevier Ltd
الموضوعAluminum
Composites
Extrusion
Mechanical properties
Microwave processing
العنوانEffect of Inconel625 particles on the microstructural, mechanical, and thermal properties of Al-Inconel625 composites
النوعArticle
رقم المجلد25
dc.accessType Abstract Only


الملفات في هذه التسجيلة

الملفاتالحجمالصيغةالعرض

لا توجد ملفات لها صلة بهذه التسجيلة.

هذه التسجيلة تظهر في المجموعات التالية

عرض بسيط للتسجيلة