Show simple item record

AuthorParangusan, Hemalatha
AuthorBhadra, Jolly
AuthorAhmad, Zubair
AuthorKaruppasamy, K.
AuthorMallick, Shoaib
AuthorTouati, Farid
AuthorAl-Thani, Noora
Available date2023-01-11T06:26:11Z
Publication Date2022-10-01
Publication NameCeramics International
Identifierhttp://dx.doi.org/10.1016/j.ceramint.2022.05.063
CitationParangusan, H., Bhadra, J., Ahmad, Z., Karuppasamy, K., Mallick, S., Touati, F., & Al-Thani, N. (2022). Hierarchical BaTiO3/NiFe2O4 nanocomposite as an efficacious OER catalyst for photoelectrochemical water splitting. Ceramics International.
ISSN02728842
URIhttps://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85130338129&origin=inward
URIhttp://hdl.handle.net/10576/38312
AbstractPhotocatalysis of water for the production of oxygen and hydrogen is one of the most important development in the drive for clean energy, and it has received a lot of attention because it is a green and easy step to generate fuels. Developing a more efficient, chemically stable, green and cost-effective catalytic devices for commercial use still remains a challenging task. In this research work, we have designed a new kind of hetero nanostructured hierarchical electrode BaTiO3/NiFe2O4 composite by facile hydrothermal process. The sluggish oxygen-evolving reaction is one of the major challenge in water technology (OER). The prepared photocatalyst exhibited excellent photocatalytic activity towards OER. The prepared electrodes’ physicochemical behaviors have been studied using a variety of spectroscopic techniques include powder X-ray diffraction, UV–Vis diffuse reflectance spectroscopy, X-ray photoelectron spectroscopy and Transmission electron microscopy. The HR-TEM results of pristine BaTiO3 show partially agglomerated nanoparticles which are in spherical shape with size ranging from 50 to 78 nm, whereas pure NiFe2O4 displays needle-like nanorods with average width and length of the needles are around 31 nm and 1.5 μm respectively and the BaTiO3/NiFe2O4 composite shows combination of nanoparticles with nanorods. XPS analysis has revealed the oxygen vacancies and composition of the materials. The optical band gap investigation showed that the composites Eg value is in the visible region. UV–Vis diffuse reflectance spectroscopy revealed that the hierarchical BaTiO3/NiFe2O4 composite has enhanced absorption in the visible region. The photocatalytic activity results show that, the prepared BaTiO3/NiFe2O4 composite photoelectrode yields a photocurrent density of 0.34 mA/cm2 at 1.6 V vs SCE reference electrode confirms their PEC water splitting ability. These observed findings of the hetero-composite clearly make a way to employ them as the plausible electrode for effectual oxygen evolution reaction.
SponsorThis work is supported by Qatar University Internal Grant having project number QUCG‐CAM‐20/21–6. The findings achieved herein are solely the responsibility of the authors. The characterizations of this work are accomplished in the Central Laboratories unit, Qatar University. A part of the characterization has been accomplished in the Gas Processing Center.
Languageen
PublisherElsevier
SubjectBaTiO /NiFe O 3 2 4
Hierarchical nanocomposite
Photocatalyst
Water splitting
TitleHierarchical BaTiO3/NiFe2O4 nanocomposite as an efficacious photoanode for photoelectrochemical water splitting
TypeArticle
Pagination29136-29143
Issue Number19
Volume Number48
ESSN1873-3956


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record