عرض بسيط للتسجيلة

المؤلفSadeq, Mohammed
المؤلفMasad, Eyad A.
المؤلفAl-Khalid, Hussain
المؤلفSirin, Okan
تاريخ الإتاحة2024-03-27T10:10:45Z
تاريخ النشر2018-04
اسم المنشورAdvances in Materials and Pavement Performance Prediction - Proceedings of the International AM3P Conference, 2018
الاقتباسSadeq, M., Masad, E. A., Al-Khalid, H., & Sirin, O. (2018). Characterisation of air voids in W-FAM samples using X-Ray CT imaging. In Advances in Materials and Pavement Prediction (pp. 97-100). CRC Press.
الترقيم الدولي الموحد للكتاب 978-113831309-5
معرّف المصادر الموحدhttps://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85061264126&origin=inward
معرّف المصادر الموحدhttp://hdl.handle.net/10576/53592
الملخصThis study documents the use of high-resolution X-Ray Computed Tomography to characterise air void distribution in Fine Aggregate Mixtures (FAM) prepared using Warm Mix Asphalt (WMA) additives (W-FAM). Specimens were imaged before and after subjecting them to repeated creep and recovery test. The produced images were digitally analysed to measure the air voids size in the samples and changes that occurred due to testing. While the same compaction effort was used to prepare all specimens, mixes prepared using WMA additives had less percentage of air voids than the control mix. In general, the increase in percentage of air voids happened in specimens that had larger air voids prior to loading. In addition, there was more changes in air voids in the original (control) specimens than the W-FAM specimens.
راعي المشروعThis work was made possible by the NPRP award [NPRP 5-506-2-203] from the Qatar National Research Fund (a member of Qatar Foundation).
اللغةen
الناشرCRC Press/Balkema
الموضوعFine Aggregate Mixtures
Warm Mix Asphalt
العنوانCharacterisation of air voids in w-fam samples using x-ray ct imaging
النوعConference Paper
الصفحات97-100
dc.accessType Abstract Only


الملفات في هذه التسجيلة

الملفاتالحجمالصيغةالعرض

لا توجد ملفات لها صلة بهذه التسجيلة.

هذه التسجيلة تظهر في المجموعات التالية

عرض بسيط للتسجيلة