Geometrical investigation of piezoelectric patches for broadband energy harvesting in non-deterministic composite plates
Author | Muthalif, Asan G. A. |
Author | Ali, Abdelrahman |
Author | Renno, Jamil |
Author | Wahid, Azni N. |
Author | Nor, Khairul A. M. |
Author | Nordin, Nor H. |
Available date | 2024-05-14T03:51:42Z |
Publication Date | 2021 |
Publication Name | Materials |
Resource | Scopus |
Identifier | http://dx.doi.org/10.3390/ma14237370 |
ISSN | 19961944 |
Abstract | Mechanical energy is the most ubiquitous form of energy that can be harvested and converted into useful electrical power. For this reason, the piezoelectric energy harvesters (PEHs), with their inherent electromechanical coupling and high-power density, have been widely incorporated in many applications to generate power from ambient mechanical vibrations. However, one of the main challenges to the wider adoption of PEHs is how to optimize their design for maximum energy harvesting. In this paper, an investigation was conducted on the energy harvesting from seven piezoelectric patch shapes (differing in the number of edges) when attached to a non-deterministic laminated composite (single/double lamina) plate subjected to change in fiber orientation. The performance of the PEHs was examined through a coupled-field finite element (FE) model. The plate was simply supported, and its dynamics were randomized by attaching randomly distributed point masses on the plate surface in addition to applying randomly located time-harmonic point forces. The randomization of point masses and point force location on a thin plate produce non-deterministic response. The design optimization was performed by employing the ensemble-responses of the electrical potential developed across the electrodes of the piezoelectric patches. The results present the optimal fiber orientation and patch shape for maximum energy harvesting in the case of single and double lamina composite plates. The results show that the performance is optimal at 0° or 90° fiber orientation for single-lamina, and at 0°/0° and 0°/90° fiber orientations for double-lamina composites. For frequencies below 25 Hz, patches with a low number of edges exhibited a higher harvesting performance (triangular for single-lamina/quadrilateral for double-lamina). As for the broadband frequencies (above 25 Hz), the performance was optimal for the patches with a higher number of edges (dodecagonal for single-lamina/octagonal for double-lamina). |
Sponsor | Funding: The authors gratefully acknowledge the financial support by Qatar University-International Research Collaboration under grant number IRCC-2020-017, and the Qatar National Research Fund through the National Priorities Research Program under grant number NPRP 11S-1220-170112. |
Language | en |
Publisher | MDPI |
Subject | Finite element analysis Laminated composites Non-deterministic structures Piezoelectric energy harvesters |
Type | Article |
Issue Number | 23 |
Volume Number | 14 |
Files in this item
This item appears in the following Collection(s)
-
Mechanical & Industrial Engineering [1339 items ]