Show simple item record

AuthorMartinez, Alan
AuthorNarayanan, Deeparekha
AuthorCase, Raymundo
AuthorCastaneda, Homero
AuthorRadwan, Ahmed Bahgat
AuthorBhadra, Jolly
AuthorAl-Qahtani, Noora H.
AuthorAbdullah, Aboubakr M.
AuthorAl-Thani, Noora
AuthorEl-Haddad, Muhsen A.M.
Available date2024-07-10T07:56:49Z
Publication Date2024
Publication NameElectrochimica Acta
ResourceScopus
Identifierhttp://dx.doi.org/10.1016/j.electacta.2023.143655
ISSN134686
URIhttp://hdl.handle.net/10576/56542
AbstractThe influence of temperature (25, 75, and 150 °C) on the passivation behavior of Modified Martensitic 13Cr Stainless Steel (M13Cr) in CO2 saturated acidic salt brine environments was investigated. The material was found to contain Ti(C,N) inclusions and Volta potential maps obtained through scanning Kelvin probe force microscopy (SKPFM) identified them to be more anodic (60 mV lower) than the matrix. Cyclic polarization (CP) showed a shift in pitting and repassivation potentials to more negative values at higher temperatures. Electrochemical impedance spectroscopy (EIS) and Mott–Schottky tests showed that the passive film formed was more defective with increasing temperature. X-ray photoelectron spectroscopy (XPS) confirmed the presence of a defective passive film with reduced repassivation capabilities due to higher contents of soluble CrO3/Cr6+ species at temperatures exceeding 75 °C. These results offer valuable insights into understanding the pit initiation mechanisms and performance of M13Cr.
SponsorThe authors would like to give their gratitude to Shell plc, Qatargas, and the Qatar National Research Fund for sponsorship and allocating funds to further progress this work through the NPRP12S-0203-190038. Acknowledgements are also given to Qatar University for collaboration on this project. We would also like to acknowledge our undergraduate research technicians Gary Nuñez and Marisol Hernandez Jaimes for both sample and solution preparation.
Languageen
PublisherElsevier
SubjectModified martensitic 13Cr
Passivity
SKPFM
Sweet corrosion
XPS
TitlePit initiation mechanism of modified martensitic 13Cr stainless steel exposed to CO2 saturated acidic environments at elevated temperatures induced by Ti(C,N) inclusions
TypeArticle
Volume Number475


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record