Surface modification of poly(Lactic acid) film via cold plasma assisted grafting of fumaric and ascorbic acid
![Thumbnail](/bitstream/handle/10576/57749/polymers-13-03717.pdf.jpg?sequence=3&isAllowed=y)
View/ Open
Date
2021Author
Abdulkareem, AsmaKasak, Peter
Nassr, Mohammed G.
Mahmoud, Abdelrahman A.
Al-Ruweidi, Mahmoud Khatib A. A.
Mohamoud, Khalid J.
Hussein, Mohammed K.
Popelka, Anton
...show more authors ...show less authors
Metadata
Show full item recordAbstract
Plant-based materials have found their application in the packaging with a yearly growing production rate. These naturally biodegradable polymers are obtained from renewable and sustainable natural resources with reduced environmental impact and affordable cost. These materials have found their utilization in fully-renewable plant-based packaging products, such as Tetra Pak®-like containers, by replacing commonly-used polyethylene as the polymer component. Poly(lactic acid) (PLA) is one of the representative plant-based polymers because of its eco-friendliness and excellent chemical and mechanical properties. In this work, a PLA surface was modified by various food additives, namely ascorbic acid (ASA) and fumaric acid (FA), using plasma-initiated grafting reactions in order to improve the surface and adhesion properties of PLA. Various analytical and microscopic techniques were employed to prove the grafting process. Moreover, the improved adhesion of the modified PLA foil to aluminum (Al) foil in a laminate configuration was proven by peel resistance measurements. The peel resistance of modified PLA increased by 74% and 184% for samples modified by ASA and FA, respectively, compared with untreated PLA.
Collections
- Center for Advanced Materials Research [1349 items ]
- Chemistry & Earth Sciences [556 items ]