عرض بسيط للتسجيلة

المؤلفLindly, Jay
تاريخ الإتاحة2009-11-25T13:03:29Z
تاريخ النشر1995
اسم المنشورEngineering Journal of Qatar University
الاقتباسEngineering Journal of Qatar University, 1995, Vol. 8, Pages 127-138.
معرّف المصادر الموحدhttp://hdl.handle.net/10576/7837
الملخصThe American Association of State Highway and Transportation Officials (AASHTO) uses resilient modulus values as the load-carrying capacity parameter for all pavement materials. However, the maximum sample diameter in standard resilient modulus test specifications is only 150 mm (6 inches). With that limitation, large-sized aggregates can not be tested at their full gradation because if top-size-to-sample diameter ratios exceed 1:5, arching effects occur during sample preparation which adversely affect the results. Thus, little work has been performed on the resilient modulus of large top sized aggregates. In this study, 305 mm (12 inch) diameter samples of two different aggregates were tested for resilient modulus. The materials were tested at top sizes of 63 mm (2.5 inches), 38 mm (1.5 inches), and 19 mm (0.75 inches). Results indicate that the tests bec~me less repeatable as top size increases, and that resilient modulus does not increase as top size increases. The second result is contrary to the conventional belief that load carrying capacity of aggregates increases with increasing top size.
اللغةen
الناشرQatar University
الموضوعEngineering: Research & Technology
العنوانHow Top-Size Affects The Resilient Modulus Of Roadway Base Materials
النوعArticle
الصفحات127-138
رقم المجلد8
dc.accessType Open Access


الملفات في هذه التسجيلة

Thumbnail

هذه التسجيلة تظهر في المجموعات التالية

عرض بسيط للتسجيلة