Browsing by Subject "Plasma treatment"
Now showing items 1-15 of 15
-
Acrylic acid plasma treatment of polypropylene nonwoven fabric [Włókniny polipropylenowe poddane obróbce plazmowej z zastosowaniem kwasu akrylowego]
( Institute of Biopolymers and Chemical Fibres , 2016 , Article)Nowadays hydrogel materials are being used in medical practice for wound dressing purposes. Hydrogel/textile composites can be formed to increase the mechanical strength and handling capability of hydrogel materials. ... -
Adhesion Improvement Between Polyethylene and Aluminum Using Eco-Friendly Plasma Treatment
( John Wiley & Sons, Inc. , 2015 , Book chapter) -
Antibacterial treatment of LDPE with halogen derivatives via cold plasma
( BME-PT and GTE , 2015 , Article)The factor limiting the application of low-density polyethylene (LDPE) in healthcare is its high susceptibility to bacterial growth. For this reason, we here investigated antibacterial treatments of LDPE foils using ... -
Antimicrobial modification of PLA scaffolds with ascorbic and fumaric acids via plasma treatment
( Elsevier B.V. , 2020 , Article)An optimal medical scaffold should be biocompatible and biodegradable and should have adequate mechanical properties and scaffold architecture porosity, a precise three-dimensional shape, and a reasonable manufacturing ... -
Eco-friendly foam biocomposites based on cellulose extracted from date palm leaves and low-density polyethylene
( Web Portal IOP , 2020 , Article)The design of composite materials using environmentally compatible materials and adopting sustainable preparation techniques is very necessary for a better environment. The present study is a step towards developing an ... -
Effect of plasma treatment on accelerated pla degradation
( BME-PT and GTE , 2021 , Article)Poly(lactic acid) (PLA) has been found to be important in various applications, such as in the medical, pharma-ceutical, and packaging industries. However, the long-term associated degradation process of PLA is a limiting ... -
Effect of plasma treatment on accelerated pla degradation
( BME-PT and GTE , 2021 , Article)Poly(lactic acid) (PLA) has been found to be important in various applications, such as in the medical, pharma-ceutical, and packaging industries. However, the long-term associated degradation process of PLA is a limiting ... -
Fabrication of flexible electrically conductive polymer-based micropatterns using plasma discharge
( Elsevier B.V. , 2020 , Article)In this work, laboratory prepared PANI and it's composite with carbon nanotubes (PANI/CNTs) were used for the fabrication of micropatterns on flexible polyethylene terephthalate (PET) substrate using the drop cast method ... -
Impact of corona and radio-frequency plasma treatment on the degradation of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV)
( BME-PT and GTE , 2022 , Article)Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) is a polyester, produced naturally by microorganisms, with excellent biocompatibility. Corona and radio-frequency (RF) plasma treatment were applied in order to improve ... -
Preparation of progressive antibacterial LDPE surface via active biomolecule deposition approach
( MDPI AG , 2019 , Article)The use of polymers in all aspects of daily life is increasing considerably, so there is high demand for polymers with specific properties. Polymers with antibacterial properties are highly needed in the food and medical ... -
Preparation of slippery liquid infused porous surfaces on polymeric substrates
( Qatar University Press , 2020 , Poster)Many polymers have been found in bio-science paralleling with advancement in a technology sector. A selection of suitable polymers for using in a biomedical sector is based on many factors such as chemical nature, surface ... -
Slippery liquid-infused porous polymeric surfaces based on natural oil with antimicrobial effect
( MDPI AG , 2021 , Article)Many polymer materials have found a wide variety of applications in biomedical indus-tries due to their excellent mechanical properties. However, the infections associated with the bio-film formation represent serious ... -
Sol-gel deposition and plasma treatment of intrinsic, aluminum-doped and gallium-doped zinc oxide thin films as transparent conductive electrodes
( SPIE , 2015 , Conference Paper)Zinc oxide and aluminum/gallium-doped zinc oxide thin films were deposited via sol-gel spin-coating technique. Employing plasma treatment as alternative to post thermal annealing, we found that the morphologies of these ... -
Surface functionalization of a polyurethane surface via radio-frequency cold plasma treatment using different gases
( MDPI AG , 2020 , Article)Herein, the surface treatment of polyurethane (PU) films via air, O2, N2, Ar, and their mixtures were tested. The treatment was performed to incorporate new polar functionalities on the polymer surface and achieve improved ... -
Thermally conductive polyethylene/expanded graphite composites as heat transfer surface: Mechanical, thermo-physical and surface behavior
( MDPI AG , 2020 , Article)Composites of high-density polyethylene (HDPE) and expanded graphite (EG) are prepared for heat exchangers in multi-effect distillation (MED) desalination. At 50 wt.% EG loading, the thermal conductivity of HDPE was increased ...