Accurate PpT Data for Methane from (300 to 450) K up to 180 MPa

Show simple item record Cristancho, Diego E. en_US Matilla, Ivan D. en_US Ejaz, Saquib en_US Hall, Kenneth R. en_US Atilhan, Mert en_US Iglesia-Silva, Gustavo A. en
date.accessioned 2010-02-17T08:34:19Z en_US
date.available 2010-02-17T08:34:19Z en_US
date.issued 2010-01-10 en_US
identifier.citation Accurate PρT Data for Methane from (300 to 450) K up to 180 MPa, Diego E. Cristancho, Ivan D. Mantilla, Saquib Ejaz, Kenneth R. Hall, Mert Atilhan, and Gustavo A. Iglesia-Silva, Journal of Chemical & Engineering Data 2010 55 (2), 826-829 en_US
identifier.uri en_US
description.abstract This paper reports PFT data measured with a high-pressure, single-sinker, magnetic-suspension densimeter (MSD) from (300 to 450) K up to 180 MPa. Our MSD technique yields accurate data, with less than 0.05 % relative uncertainty, over the pressure range of (10 to 200) MPa. The experimental data compare well to the Setzmann and Wagner equation of state as implemented in RefProp 8.0. These methane density data are consistent with the low range of pressure predicted by RefProp 8.0 that has a relative uncertainty of 0.03 % up to 12 MPa and 0.07 % up to 50 MPa. The density predictions of this model agree well with previous data at higher pressures. The equation predicts data with almost the same uncertainty as the experimental data up to 180 MPa. These PFT data also allow reliable determination of both second and third virial coefficients. en_US
language.iso en_US en_US
publisher American Chemical Society en_US
subject Density of gas en_US
subject Metane en_US
subject Mert Atilhan en_US
subject Magnetic Suspension Densimeter en_US
title Accurate PpT Data for Methane from (300 to 450) K up to 180 MPa en_US
type Article en_US
identifier.v test

Files in this item

This item appears in the following Collection(s)

Show simple item record