Search
Now showing items 1-10 of 14
Modification of polyethylene by RF plasma in different/mixture gases
(
MDPI AG
, 2019 , Article)
Herein, low-density polyethylene (LDPE) films were treated using radio-frequency plasma discharge in the presence of air, nitrogen, oxygen, argon, and their mixtures to introduce new chemical functionalities. The surface ...
The Separation of Emulsified Water/Oil Mixtures through Adsorption on Plasma-Treated Polyethylene Powder
(
Qatar University Press
, 2021 , Poster)
This work addresses the preparation and characterization of efficient adsorbents for tertiary treatment (oil content below 100 ppm) of oil/water emulsions. Powdered low-density polyethylene (LDPE) was modified by radio-frequency ...
2D Ti3C2Tx (MXene)-reinforced polyvinyl alcohol (PVA) nanofibers with enhanced mechanical and electrical properties
(
Public Library of Science
, 2017 , Article)
Novel 2D Ti3C2Tx (MXene)-reinforced polyvinyl alcohol (PVA) nanofibers have been successfully fabricated by an electrospinning technique. The high aspect ratio, hydrophilic surfaces, and metallic conductivity of delaminated ...
Antibacterial Modification Of Polyethylene By Multistage Process Utilizing Low-temperature Plasma
(
Hamad bin Khalifa University Press (HBKU Press)
, 2014 , Conference Paper)
Limiting factor of PE application in healthcare is high susceptibility of polyethylene towards bacterial growth. For this reason, antibacterial treatment of PE foils using appropriate antibacterial agents was used in this ...
Reinforcement of copolyamide membranes for water treatment applications
(
Hamad bin Khalifa University Press (HBKU Press)
, 2018 , Conference Paper)
Clean water is the key element for all living organisms to sustain life. However, due to the rapid industrialization and large increase in the population, the contamination of water resources is important issue occurred ...
Cold Plasma as Effective Tool for Aluminum Surface Cleaning
(
Hamad bin Khalifa University Press (HBKU Press)
, 2016 , Conference Paper)
Aluminum (Al) is heavily used to manufacture structural parts in the aeronautic, railway, automotive or naval industries because of its lightness and its corrosion resistance [1]. One of the most popular uses of Al is in ...
Enhancement of adhesion characteristics of low-density polyethylene using atmospheric plasma initiated-grafting of polyethylene glycol
(
MDPI AG
, 2021 , Article)
The low-density polyethylene/aluminum (LDPE/Al) joint in Tetra Pak provides stability and strength to food packaging, ensures protection against outside moisture, and maintains the nutritional values and flavors of food ...
Separation of water/oil emulsions by an electrospun copolyamide mat covered with a 2D Ti3C2Tx MXene
(
MDPI AG
, 2020 , Article)
Purpose: Copolyamide 6,10 (coPA) electrospun mats were covered with multilayered (ML) and single-layered (SL) MXene (Ti3C2Tx) as a membrane for the separation of water/vegetable oil emulsions. Methods: Prepared membranes ...
Thermally conductive polyethylene/expanded graphite composites as heat transfer surface: Mechanical, thermo-physical and surface behavior
(
MDPI AG
, 2020 , Article)
Composites of high-density polyethylene (HDPE) and expanded graphite (EG) are prepared for heat exchangers in multi-effect distillation (MED) desalination. At 50 wt.% EG loading, the thermal conductivity of HDPE was increased ...
An Enhancement of Compositional Stability of Phase Change Materials by Lamination with Aluminum Sheet
(
MDPI
, 2023 , Article)
The wax leakage from shape-stabilized phase change materials (SSPCMs) is a limitation because it reduces their functionality. In this work, an enhancement of the compositional stability of SSPCMs formed by high-density ...