Engineering of magnetically separable ZnFe2O4@ TiO2 nanofibers for dye-sensitized solar cells and removal of pollutant from water
MetadataShow full item record
Abstract In this study, magnetic Zinc Ferrite (ZnFe2O4)@TiO2 nanofibers were prepared by low cost and nontoxic route; hydrothermal technique followed by electrospinning process. The prepared magnetic ZnFe2O4@TiO2 nanofibers were morphologically and structurally analyzed by X-ray diffractometer (XRD), Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscope (FESEM), transmission electron microscope (TEM), and thermal gravimetric analysis (TGA). The prepared magnetic ZnFe2O4@TiO2 nanofibers were utilized as photoanode for the fabrication of dye-sensitized solar cells (DSSCs) and presented applicable performance with 4.2% overall conversion efficiency with high short circuit current density (JSC) of 10.16 mA/cm2. The maximum ∼42% incident photo-to-current conversion efficiency (IPCE) value was also recorded at 520 nm. In addition, ZnFe2O4@TiO2 nanofibers were not only possessed the good conversion efficiency, but also shown excellent photocatalytic efficiency with magnetic properties towards the dye remediation. Prepared ZnFe2O4@TiO2 nanofibers can be considered as a promising material for energy conversion and environmental applications.
http://hdl.handle.net/10576/5611 ; http://dx.doi.org/10.1016/j.jallcom.2017.06.211
- Chemical Analysis Lab [10 items ]