Show simple item record

AuthorMoghaddasi A.
AuthorSobolciak P.
AuthorPopelka A.
AuthorSadasivuni K.K.
AuthorSpitalsky Z.
AuthorKrupa I.
Available date2020-04-01T06:54:48Z
Publication Date2019
Publication NameProcesses
ResourceScopus
ISSN22279717
URIhttp://dx.doi.org/10.3390/PR7120906
URIhttp://hdl.handle.net/10576/13620
AbstractThis paper addresses the preparation of electrically conductive electrospun mats on a base of styrene-isoprene-styrene copolymer (SIS) and multiwall carbon nanotubes (CNTs) and their application as active sensing elements for the detection of vegetable oil impurities dispersed within water. The most uniform mats without beads were prepared using tetrahydrofuran (THF)/ dimethyl formamide (DMF) 80:20 (v/v) as the solvent and 13 wt. % of SIS. The CNT content was 10 wt. %, which had the most pronounced changes in electrical resistivity upon sorption of the oil component. The sensors were prepared by deposition of the SIS/CNT layer onto gold electrodes through electrospinning and applied for sensing of oil dispersed in water for 50, 100, and 1000 ppm. - 2019 by the authors.
SponsorThis publication was supported by the Qatar University Collaborative Grant QUCG-CAM-19/20-2. The findings achieved herein are solely the responsibility of the authors. The publication of this article was funded by the Qatar National Library.
Languageen
PublisherMDPI AG
SubjectCarbon nanotubes
Nanocomposites
Sensors
TitleElectrically conductive electrospun polymeric mats for sensing dispersed vegetable oil impurities inwastewater
TypeArticle
Issue Number12
Volume Number7
dc.accessType Open Access


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record