Center for Advanced Materials Research
Recent Submissions
-
Melt processing and characterisation of polyamide 6/graphene nanoplatelet composites
( Royal Society of Chemistry , 2015 , Article)Graphene, due to its outstanding properties, has become the topic of much research activity in recent years. Much of that work has been on a laboratory scale however, if we are to introduce graphene into real product ... -
Processing and characterization of polyethylene-based composites
( Taylor & Francis , 2015 , Article)Thermoplastic matrix polymer composites have gained commercial success in the semistructural and structural applications. Polyethylene (PE) is one of the most versatile and widely used thermoplastics in the world because ... -
Silk as a reinforcement in polymer matrix composites
(2015 , Book chapter)Natural fibers perform well as reinforcement materials in polymer matrix composites and provide ecological and environmental advantages. Both plant- and animal-based natural fibers have been studied for their mechanical ... -
Improved flexible, controlled dielectric constant material from recycled LDPE polymer composites
( Springer Nature , 2016 , Article)In this study, recycled low density polyethylene (RLDPE) is developed with the addition of aluminum oxide (Al2O3) to have new polymer composites. The following wt% were used of the filler (1, 4 and 6 wt%). Tensile properties, ... -
Biotechnological production process and life cycle assessment of graphene
( Hindawi , 2017 , Article)The aim of this study is to compare the graphene produced using a biotechnological method (Escherichia coli) with the graphene produced by Hummers' method (a chemical method) and to study the effect on the energy consumption ... -
Melt processing and properties of linear low density polyethylene-graphene nanoplatelet composites
( Elsevier , 2016 , Article)Composites of Linear Low Density Polyethylene (LLDPE) and Graphene Nanoplatelets (GNPs) were processed using a twin screw extruder under different extrusion conditions. The effects of screw speed, feeder speed and GNP ... -
The influence of aeration scheme and aeration rate on the permeate flux for wastewater treatment using membrane bioreactors: Experimental and artificial neural network modeling
( Desalination Publications , 2021 , Article)In this paper, the effect of time, aeration scheme, aeration rate, and mixed liquor suspended solid (MLSS) concentration on the permeate flux in membrane bioreactors have been studied. Aeration rates of 0.5, 1.0, and 1.5 ... -
Pressure retarded osmosis: Advancement, challenges and potential
( Elsevier , 2021 , Article Review)An excessive amount of renewable energy could be possibly produced when solutions of dissimilar salinities are combined simultaneously in a semipermeable membrane. The aforestated energy harnessing for transformation into ... -
Modeling of forward osmosis process using artificial neural networks (ANN) to predict the permeate flux
( Elsevier , 2020 , Article)Artificial neural networks (ANN) are black box models that are becoming more popular than transport-based models due to their high accuracy and less computational time in predictions. The literature shows a lack of ANN ... -
Artificial neural network modeling of wastewater treatment and desalination using membrane processes: A review
( Elsevier , 2021 , Article Review)The freshwater scarcity is causing a major challenge due to the growing global population. The brackish water and seawater are the biggest sources of water on the planet. Therefore, using desalination and water treatment ... -
Recent developments in forward osmosis membranes using carbon-based nanomaterials
( Elsevier , 2020 , Article Review)Contamination and industrial development are among the reasons for water quality deterioration beyond treatability by conventional processes. Unfortunately, conventional water and wastewater treatment technologies are not ... -
Modeling and sensitivity analysis of the forward osmosis process to predict membrane flux using a novel combination of neural network and response surface methodology techniques
( MDPI AG , 2021 , Article)The forward osmosis (FO) process is an emerging technology that has been considered as an alternative to desalination due to its low energy consumption and less severe reversible fouling. Artificial neural networks (ANNs) ... -
AC Conductivity of Gamma Irradiated LDPE/ZIF-8 Composite
( Taylor and Francis Ltd. , 2022 , Article)Metal–organic frameworks (MOFs) are a class of materials that are increasingly used for the detection and separation of gases. This article presents the influence of gamma radiation on the dielectric properties of a ... -
Estimation of Mechanical Properties of Copper Powder Filled Linear Low-Density Polyethylene Composites
( Springer Science and Business Media B.V. , 2022 , Article)Purpose: The complex geometry of many composites is in a loose multi-phase and the large difference in the mechanical and electrical properties of the different components makes it difficult to predict the effective ... -
Comparative experimental and modelling study of the thermal and thermo-mechanical properties of LLDPE/wax blends
( Springer Science and Business Media B.V. , 2022 , Article)The interactions and morphology of molecules in a polymer blend influence the physical properties of the blend. However, little is known about the influence of molecular interaction and morphology on the thermal and ... -
A facile energy-efficient approach to prepare super oil-sorbent thin films
( Elsevier Ltd , 2023 , Article)Oil spills on water surface and shoreline have caused significant water pollution, and one of the ways to deal with them is to use oil sorbents. An effective sorbent provides high oil uptake and retention values, high ... -
Free-standing polypropylene porous thin films using energy efficient coating technique
( Elsevier Ltd , 2023 , Article)Amongst various techniques to prepare thin films, spin coating takes less time to make thin films, is less energy-intensive, is easier to use, and provides reproducible results quickly. It is observed that such a user-friendly ... -
Facile fabrication of CuO nanoparticles via microwave-assisted method: photocatalytic, antimicrobial and anticancer enhancing performance
( Taylor & Francis , 2022 , Article)In this current research, biogenic Copper oxide (CuO) nanoparticles were successfully produced by the green method, i.e. microwave-assisted process using Andrographis paniculata as a source. Microwave-assisted biogenic CuO ... -
A comparative assessment on life cycle analysis of the biodiesel fuels produced from soybean, Jatropha, Calophyllum inophyllum, and microalgae
( Uppalapati, S., Jani, S. P., Khan, M. B. A., Alagarsamy, M., Manoharan, M., Panchal, H., & Sadasivuni, K. K. (2022). A comparative assessment on life cycle analysis of the biodiesel fuels produced from soybean, Jatropha, Calophyllum inophyllum, and microalgae. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 44(2), 3253-3272. , 2022 , Article)There is a continuous depletion of fossil resources recorded in 20th century for the production of diesel that resulted in significant climatic change. The current study focuses on the challenges faced due to energy crisis ... -
A Family of 2D-MXenes: Synthesis, Properties, and Gas Sensing Applications
( American Chemical Society , 2022 , Article)Gas sensors, capable of detecting and monitoring trace amounts of gas molecules or volatile organic compounds (VOCs), are in great demand for numerous applications including diagnosing diseases through breath analysis, ...