Single-Phase Transformer-based HF-Isolated Impedance Source Inverters With Voltage Clamping Techniques
المؤلف | Aleem Z. |
المؤلف | Winberg S.L. |
المؤلف | Iqbal A. |
المؤلف | Al-Hitmi M.A.E. |
المؤلف | Hanif M. |
تاريخ الإتاحة | 2020-04-01T09:45:59Z |
تاريخ النشر | 2019 |
اسم المنشور | IEEE Transactions on Industrial Electronics |
المصدر | Scopus |
الرقم المعياري الدولي للكتاب | 2780046 |
الملخص | In this paper, a new family of impedance source inverters is presented. It employs high-frequency electrical isolation between the inverter bridge switches and the load along with voltage clamping across the dc-link voltage. Conventional Z-source inverters (ZSIs) employs an impedance network that consists of inductors and capacitors. It has unique features that realize both step-up/step-down functions and eliminates the need of dead/overlap times. This paper extends this novel concept by using electrical isolation in impedance source inverters. High-frequency isolation has many advantages in terms of immunity and reliability; when applied with impedance source inverters this makes ZSIs a preferable choice for industrial applications. In photo-voltaic systems, the addition of the high-frequency transformer provides safety by avoiding the injection of dc circulating current into the grid, without the need of an external bulky line frequency transformer. The gain of the proposed inverter design can be accurately selected by choosing the turns ratio of the high frequency transformer (HFT) or by adjusting the shoot-through duty cycle (STDC) to the inverter. This allows for greater freedom especially when utilizing a higher modulation index, with the STDC allowing dynamic gain adjusts to be done speedily during operation of the inverter. Additionally, a dc-rail voltage clamping technique for the proposed class of isolated ZSIs is also discussed. This technique provides benefits not only in improving the output voltage quality, but also in reducing voltage stress of the active and passive components by minimizing the voltage spikes across the switching devices. In this paper, several high-frequency isolated ZSIs are presented, and an example isolated improved ?ZSI design is shown and discussed in detail. Simulations are provided for the proposed class of isolated inverters to verify their working. Further experimental investigation has been done for which results for the isolated improved ?ZSI are reported. These empirical results have largely confirmed the expected benefits that were determined through simulation and accurate model-based testing. - 2018 IEEE. |
راعي المشروع | Manuscript received May 16, 2018; revised August 13, 2018 and November 9, 2018; accepted December 2, 2018. Date of publication January 3, 2019; date of current version June 28, 2019. This work was supported in part by the NPRP under Grant X-033-2-007 from the Qatar National Research Fund (a member of Qatar Foundation). (Corresponding author: Atif Iqbal.) Z. Aleem is with the Department of Electrical Engineering, Qatar University, Doha, Qatar, and University of Cape Town, Cape Town 7700, South Africa (e-mail:,zeeshan.aleem18@gmail.com). |
اللغة | en |
الناشر | Institute of Electrical and Electronics Engineers Inc. |
الموضوع | High-frequency isolation higher voltage gain impedance source single stage power conversion transformers |
النوع | Article |
الصفحات | 8434-8444 |
رقم العدد | 11 |
رقم المجلد | 66 |
الملفات في هذه التسجيلة
الملفات | الحجم | الصيغة | العرض |
---|---|---|---|
لا توجد ملفات لها صلة بهذه التسجيلة. |
هذه التسجيلة تظهر في المجموعات التالية
-
الهندسة الكهربائية [2616 items ]