Adsorptive batch and biological treatments of produced water: Recent progresses, challenges, and potentials

Abstract

Produced water is responsible for the largest contribution in terms of waste stream volume associated with the production of oil and gas. Characterization of produced water is very crucial for the determination of its main components and constituents for optimal selection of the treatment method. This review aims to review and critically discuss various treatment options that can be considered cost-efficient and environmentally friendly for the removal of different pollutants from produced water. Great efforts and progresses were made in various treatment options, including batch adsorption processes, membrane filtration, advanced oxidation, biological systems, adsorption, coagulation, and combined processes. Chemical precipitation, membrane filtration, and adsorption have high removal efficiencies that can reach more than 90% for different produced water components. The most effective method among these methods is adsorption using different adsorbents media. In this review, date-pits activated carbons, microemulsions-modified date pits, and cellulose nanocrystals as low-cost adsorbents were thoroughly reviewed and discussed. Moreover, the potential of using biological treatments in the removal of various pollutants from produced water such as conventional activated sludge, sequential batch reactor, and fixed-film biological aerated filter reactors were systematically discussed. Generally, produced water can be utilized in various fields including habitat and wildlife, agricultural and irrigation sector, energy sector, fire control, industrial use also power regeneration. The degree of treatment will depend on the application that produced water is being reused in. For instance, to use produced water in oil and gas industries, water will require minimal treatment while for agricultural and drinking purposes high treatment level will be required. It can also be concluded that one specific technique cannot be recommended that will meet all requirements including environmental, reuse, and recycling for sustainable energy. This is because of various dominant factors including the type of field, platform type, chemical composition, geological location, and chemical composition of the production chemicals.