عرض بسيط للتسجيلة

المؤلفAl Bakain R.Z.
المؤلفAl-Degs Y.S.
المؤلفIssa A.A.
المؤلفAbdul Jawad S.
المؤلفAbu Safieh K.A.
المؤلفAl-Ghouti M.A.
تاريخ الإتاحة2022-05-31T19:01:17Z
تاريخ النشر2014
اسم المنشورClay Minerals
المصدرScopus
المعرّفhttp://dx.doi.org/10.1180/claymin.2014.049.5.04
معرّف المصادر الموحدhttps://www.scopus.com/inward/record.uri?eid=2-s2.0-84929240166&doi=http://dx.doi.org/10.1180%2fclaymin.2014.049.5.04&partnerID=40&md5=e05b4ed37110ac9032a4098a2315ecb1
معرّف المصادر الموحدhttp://hdl.handle.net/10576/31803
الملخصA kaolin clay was activated with 1.0 M H2SO4 solution at minimum liquid to solid ratio (L/S) using microwave heating. The optimum experimental conditions for activation were L/S ratio 3.0 mL 1 M H2SO4 per gram kaolin, microwave input power 500-600 W, and heating time 5-10 min. Activation at L/S < 3.0 mL/g using 1.0 M H2SO4 was not efficient, indicating the influence of solvent for absorbing microwaves more intensively and thus improving activation. Significant physicochemical changes were observed by the proposed procedure with smaller volumes of activator compared to the conventional heating method. Microwave input power and heating time have a strong influence on the quality of the final material; activation at high input power (>700 W) and longer heating times (>10 min.) are not recommended since they cause dissolution of kaolinite structure. Microwave-heated kaolin manifested better adsorption for tartrazine dye due to improvements in textural and chemical properties of kaolinite. Moreover, irradiation of used kaolinite has significantly improved dye desorption, increasing the importance of microwaves in regeneration/recycling studies. Detailed dielectric measurements of kaolin-acid mixtures recorded at frequencies much lower than 2.45 GHz revealed that absorption of radiation is highly dependent on the activator solution in the mixture. For 3.0 mL/g mixtures, high dielectric constant �? 5223, dielectric loss factor �" 5083, tangent loss tan � 1.30, penetration depth dp 0.57 cm at (103 Hz), and AC-conductivity � 0.032 �m-1 were determined at 105 Hz. Filling the pores of kaolin by acid solution increased the microwave absorption and hence de-alumination of kaolinite.
اللغةen
الناشرMineralogical Society
الموضوعAcid activation
Dielectric properties
Kaolinite
Microwave heating
Surface characterization
العنوانActivation of kaolin with minimum solvent consumption by microwave heating
النوعArticle
الصفحات667-681
رقم العدد5
رقم المجلد49
dc.accessType Abstract Only


الملفات في هذه التسجيلة

الملفاتالحجمالصيغةالعرض

لا توجد ملفات لها صلة بهذه التسجيلة.

هذه التسجيلة تظهر في المجموعات التالية

عرض بسيط للتسجيلة