Search
Now showing items 21-30 of 34
Influence of TiO2 nanoparticles incorporation to friction stir welded 5083 aluminum alloy on the microstructure, mechanical properties and wear resistance
(
Elsevier
, 2017 , Article)
The aim of the current study is to investigate the effect of addition of TiO2 nanoparticles and friction stir welding (FSW) parameter such as number of passes on microstructure, mechanical and tribological properties of ...
Comparison between microwave and conventional sintering on the properties and microstructural evolution of tetragonal zirconia
(
Elsevier Ltd
, 2018 , Article)
In this research, the comparison between microwave sintering and conventional sintering on the mechanical properties and microstructural evolution of 3 mol% yttria-stabilised zirconia were studied. Green bodies were compacted ...
Using hierarchical composite approach to improve mechanical response of Mg and Mg–Bi2O3 nano-composites
(
Elsevier, Ltd
, 2013 , Article)
Novel Mg nano-composites reinforced with either Bi2O3 nano-particles or hybrid Al–Bi2O3 particles (Bi2O3 nano-particles hybridized with Al using ball milling) have been synthesized, in this work, through powder metallurgy ...
Effect of copper-nickel interlayer thickness on laser welding-brazing of Mg/Ti alloy
(
Elsevier Ltd
, 2019 , Article)
Dissimilar lap joining of AZ31B Mg alloy to Cu-Ni coated Ti-6Al-4V was carried out by laser welding-brazing method. The effect of Cu and Ni contents on interfacial reaction and joint fracture load were analyzed. For the ...
Comparison of the effect of carbon, halloysite and titania nanotubes on the mechanical and thermal properties of LDPE based nanocomposite films
(
Chemical Industry Press
, 2018 , Article)
In this study, titania nanotubes (TNTs) were prepared by hydrothermal method with the aim to compare the properties of these one-dimensional tubular nanostructures' reinforced nanocomposites with the carbon and halloysite ...
Mechanical, sorption and adhesive properties of composites based on low density polyethylene filled with date palm wood powder
(
Elsevier Ltd
, 2014 , Article)
Low density polyethylene (LDPE) was blended with date palm wood powder (DPW) to prepare composites with concentrations of filler ranging from 10 to 70. wt.%. The Youn?s modulus of the composites significantly increased ...
Nematic opto-mechanical actuators for the fabrication of refreshable tactile systems
(2013 , Conference Paper)
Nematic elastomers are promising materials for the fabrication of actuators due to their ability to reversibly contract and expand during phase transitions triggered by external stimuli. We present a refreshable tactile ...
A review on composite materials based on recycled thermoplastics and glass fibres
(2011 , Article Review)
Mechanical properties The purpose of this paper is to review recent work on composite materials based on recycled thermoplastics and glass fibres (GFs). The high collection and separation cost of plastics waste, and the ...
Unconventional experimental technologies used for phase change materials (PCM) characterization: Part 2 - Morphological and structural characterization, physico-chemical stability and mechanical properties
(
Elsevier Ltd
, 2015 , Article)
Due to the high interest of appropriate characterization of PCM and hybrid PCM composites, different research centres and universities are using several material characterization techniques not commonly used with PCM, to ...
Recent progress and multifunctional applications of 3D printed graphene nanocomposites
(
Elsevier Ltd
, 2021 , Article Review)
This review provides a comprehensive analysis of available peer-reviewed literature in which graphene and/or its derivatives are incorporated into a polymer matrix in order to enhance the final properties and functionalities ...