بحث بسيط
السجلات المعروضة 1 -- 10 من 12
Synthesis and properties of HA/ZnO/CNT nanocomposite
(
Elsevier Ltd
, 2018 , Article)
The goal of this study was to examine the tribomechanical properties of hydroxyapatite (HA)/ZnO and HA/ZnO/CNT composite ceramics (carbon nanotubes; with different ratios 0.5 wt%, 1.0 wt%, and 1.5 wt%). The composites were ...
Differentiating the mechanical response of hierarchical magnesium nano-composites as a function of temperature
(
Elsevier, Ltd
, 2012 , Article)
The effect of temperature change on quasi-static mechanical response of monolithic Mg alongside hierarchical Mg/Al–Al2O3 nano-composites synthesized through powder metallurgy route followed by microwave assisted rapid ...
Hierarchical honeycomb auxetic metamaterials
(
Nature Publishing Group
, 2015 , Article)
Most conventional materials expand in transverse directions when they are compressed uniaxially resulting in the familiar positive Poisson’s ratio. Here we develop a new class of two dimensional (2D) metamaterials with ...
Effect of microwave sintering on the properties of copper oxide doped Y-TZP ceramics
(
Elsevier Ltd
, 2018 , Article)
The effect of various amounts of copper oxide (CuO) up to 1 wt% on the densification behaviour and mechanical properties of 3 mol% yttria-tetragonal zirconia polycrystal (Y-TZP) were studied by using microwave (MW) sintering ...
Effect of hot extrusion and T6 heat treatment on microstructure and mechanical properties of Al-10Zn-3.5Mg-2.5Cu nanocomposite reinforced with graphene nanoplatelets
(
Elsevier Ltd
, 2018 , Article)
Al-10Zn-3.5Mg-2.5Cu/graphene nanocomposites were developed by a combination of liquid metallurgy and hot extrusion techniques. The effect of varying graphene content (0.1%, 0.3%, 0.7% and 1.0%) on microstructure and ...
Comparison between microwave and conventional sintering on the properties and microstructural evolution of tetragonal zirconia
(
Elsevier Ltd
, 2018 , Article)
In this research, the comparison between microwave sintering and conventional sintering on the mechanical properties and microstructural evolution of 3 mol% yttria-stabilised zirconia were studied. Green bodies were compacted ...
Using hierarchical composite approach to improve mechanical response of Mg and Mg–Bi2O3 nano-composites
(
Elsevier, Ltd
, 2013 , Article)
Novel Mg nano-composites reinforced with either Bi2O3 nano-particles or hybrid Al–Bi2O3 particles (Bi2O3 nano-particles hybridized with Al using ball milling) have been synthesized, in this work, through powder metallurgy ...
Influence of TiO2 nanoparticles incorporation to friction stir welded 5083 aluminum alloy on the microstructure, mechanical properties and wear resistance
(
Elsevier
, 2017 , Article)
The aim of the current study is to investigate the effect of addition of TiO2 nanoparticles and friction stir welding (FSW) parameter such as number of passes on microstructure, mechanical and tribological properties of ...
The effects of gas tungsten arch welding on the corrosion and mechanical properties of AA 6061 T6
(2013 , Article)
Corrosion of welded and un-welded Aluminum Alloy 6061 T6 was investigated by immersing specimens in 3.5% (wt) NaCl solution. Potentiodynamic and open circuit potential measurements were conducted. The mechanical properties ...
Effect of copper-nickel interlayer thickness on laser welding-brazing of Mg/Ti alloy
(
Elsevier Ltd
, 2019 , Article)
Dissimilar lap joining of AZ31B Mg alloy to Cu-Ni coated Ti-6Al-4V was carried out by laser welding-brazing method. The effect of Cu and Ni contents on interfacial reaction and joint fracture load were analyzed. For the ...