Steel-made infrastructures have been expanding at an incredible rate worldwide and are critical for the expansion and operation of countless industries. Steel is susceptible to corrosion failures, particularly in aggressive ...

Ni-P/TiC nanocomposite coatings, including different concentrations of TiC nanoparticles (TCNPs) were developed on HSLA (high strength low alloy steel) substrates through the pulse electrodeposition (PED) process. The ...

Corrosion is a major cause of materials and equipment failure in the oil and gas industry, and its prevention is crucial to ensure reliability of the assets. Towards, this goal, Ni-B/AlN nanocomposite coatings were synthesized ...

Adequate corrosion protection and improved mechanical properties are necessary requirements to overcome operational costs in the industries. Ni-P based coatings are known to possess better superior corrosion resistance ...

In operation, pipelines are increasingly used worldwide to meet higher transportation demands for strategic fluids while optimizing costs. Fiber-reinforced polymer (FRP) composite is used in many pipeline industries of ...

The electrochemical behaviour of coated API X-120 steel in 0.5M of NaCl and KCl with and without cathodic protection (CP) at elevated temperature was investigated. CP was applied at -0.78 and -1.1V vs Saturated Calomel ...

Owing to the main attention as regards the metal joining in the automotive industries, many studies have been conducted to achieve this problem by joining metals materials that can provide high efficiency at minimum cost. ...

Corrosion remains one of the major and most costly challenges faced by the steel industry. Various fiber-reinforced polymer coating systems have been proposed to protect metallic piping distribution networks against ...

The effect of corrosion behavior in critical environmental conditions on the mechanical properties of composite/metal materials joints was investigated by immersing metalic materials into 5wt% hydrochloric acid solutions. ...

Corrosion of welded and un-welded Aluminum Alloy 6061 T6 was investigated by immersing specimens in 3.5% (wt) NaCl solution. Potentiodynamic and open circuit potential measurements were conducted. The mechanical properties ...