بحث بسيط
السجلات المعروضة 1 -- 10 من 24
Microstructure and mechanical properties of aluminum matrix composites with bimodal-sized hybrid NbC-B4C reinforcements
(
Elsevier
, 2022 , Article)
Aluminum (Al) is an earth-abundant metal recognized with superior properties for vital applications in the aerospace and transportation industries. Structural components of Al exhibit poor performance due to its inherent ...
Effect of Inconel625 particles on the microstructural, mechanical, and thermal properties of Al-Inconel625 composites
(
Elsevier Ltd
, 2020 , Article)
This research work investigates the effect of concentration of Inconel625 particles on the microstructural, mechanical, and thermal properties of Al-Inconel625 composites. The Al-Inconel625 composites containing varying ...
Improving mechanical, thermal and damping properties of niti (Nitinol) reinforced aluminum nanocomposites
(
MDPI AG
, 2020 , Article)
In the present study, Ni50Ti50 (NiTi) particle reinforced aluminum nanocomposites were fabricated using microwave sintering and subsequently hot extrusion. The effect of NiTi (0, 0.5, 1.0, and 1.5 vol %) content on the ...
Effect of zirconia nanotube coating on the hydrophilicity and mechanochemical behavior of zirconium for biomedical applications
(
Elsevier
, 2022 , Article)
Zirconium has attracted considerable attention in the biomedical field owing to its biocompatibility and desirable tribological and mechanical properties. In this study, we anodized pure zirconium in an ammonium fluoride ...
Effects of titanium and carbon nanotubes on nano/micromechanical properties of HA/TNT/CNT nanocomposites
(
Elsevier
, 2021 , Article)
In this study, hydroxyapatite/titanium nanotube/carbon nanotube (HA/TNT/CNT) nanocomposites with different CNT contents were fabricated using a combination of hydrothermal and sol–gel methods. The nanocomposite powders ...
Influence of TiO2 nanoparticles incorporation to friction stir welded 5083 aluminum alloy on the microstructure, mechanical properties and wear resistance
(
Elsevier
, 2017 , Article)
The aim of the current study is to investigate the effect of addition of TiO2 nanoparticles and friction stir welding (FSW) parameter such as number of passes on microstructure, mechanical and tribological properties of ...
Effect of corrosion on mechanical properties of the joining of materials
(
Universiti Malaysia Pahang
, 2020 , Article)
The effect of corrosion behavior in critical environmental conditions on the mechanical properties of composite/metal materials joints was investigated by immersing metalic materials into 5wt% hydrochloric acid solutions. ...
The effects of gas tungsten arch welding on the corrosion and mechanical properties of AA 6061 T6
(2013 , Article)
Corrosion of welded and un-welded Aluminum Alloy 6061 T6 was investigated by immersing specimens in 3.5% (wt) NaCl solution. Potentiodynamic and open circuit potential measurements were conducted. The mechanical properties ...
Mechanical properties of human hepatic tissues to develop liver-mimicking phantoms for medical applications
(
Springer
, 2023 , Article Review)
Using liver phantoms for mimicking human tissue in clinical training, disease diagnosis, and treatment planning is a common practice. The fabrication material of the liver phantom should exhibit mechanical properties similar ...
Effect of microwave sintering on the properties of copper oxide doped Y-TZP ceramics
(
Elsevier Ltd
, 2018 , Article)
The effect of various amounts of copper oxide (CuO) up to 1 wt% on the densification behaviour and mechanical properties of 3 mol% yttria-tetragonal zirconia polycrystal (Y-TZP) were studied by using microwave (MW) sintering ...