تصفح Research Units حسب العنوان
السجلات المعروضة 2237 -- 2256 من 4709
-
Influence of bimetallic nanoparticles composition and synthesis temperature on the electrocatalytic activity of NiMn-incorporated carbon nanofibers toward urea oxidation
( Elsevier , 2018 , Article)High efficiency, cost effectivity and the availability of hydrogen are the advantages of electrolysis as a strategy for urea-containing wastewater treatment. Composition, morphology, and synthesis-temperature distinctly ... -
Influence of bio fabricated manganese oxide nanoparticles for effective callogenesis of Moringa oleifera Lam
( Elsevier Masson s.r.l. , 2023 , Article)The use of nanoscale fertilizers to boost crop output has increased in recent years. Nanoparticles (NPs) can stimulate the biosynthesis of bioactive compounds in plants. It is the first report on biosynthesized manganese ... -
Influence of blending and blend morphology on the thermal properties and crystallization behaviour of PLA and PCL in PLA/PCL blends
( Springer , 2016 , Article)In this paper, we reported on the influence of PCL on the cold crystallization behaviour of PLA in different PLA/PCL blends, and on the influence of blending with PLA on the PCL crystallization behaviour and kinetics. The ... -
Influence of carbon nanotubes on phase composition, thermal and post-heating behavior of cementitious composites
( Multidisciplinary Digital Publishing Institute (MDPI) , 2021 , Article)This paper experimentally investigates the influence of carbon nanotubes (CNTs) on phase composition, microstructure deterioration, thermal behavior, and residual mechanical strengths of cementitious composites exposed to ... -
Influence of choline chloride based natural deep eutectic solvent on the separation and rheological behavior of stable bentonite suspension
( Elsevier B.V. , 2021 , Article)Colloids in wastewater are considered a serious problem due to their stability and separation difficulty. Coagulation/ flocculation processes are the most common for the separation of colloids because of their high-performance ... -
Influence of combined natural deep eutectic solvent and polyacrylamide on the flocculation and rheological behaviors of bentonite dispersion
( Elsevier , 2022 , Article)The influence of hybrid coagulation/ flocculation systems on the degree of flocculation and rheological behavior of highly stable bentonite suspension has been investigated throughout this study. Natural deep eutectic ... -
Influence of composite particle formation on the performance and economics of grit removal
( Elsevier Ltd , 2017 , Article)Grit is routinely removed at the headworks of municipal wastewater treatment works to limit its onerous impact on downstream processes. Grit separation technologies are normally based on sedimentation of a homogeneous ... -
Influence of CuO nanoparticles and graphene nanoplatelets on the sensing behaviour of poly(vinyl alcohol) nanocomposites for the detection of ethanol and propanol vapors
( Springer New York LLC , 2018 , Article)Poly(vinyl alcohol)/copper oxide/graphene nanoplatelets (PVA/CuO/Gr-NPls) nanocomposite based chemiresistive alcohol sensors were fabricated using colloidal blending method. The PVA/CuO/Gr-NPls nanocomposite films were ... -
Influence of graphene oxide on mechanical, morphological, barrier, and electrical properties of polymer membranes
( Elsevier , 2016 , Article Review)This paper expresses a short review of research on the effects of graphene oxide (GO) as a nanocomposite element on polymer morphology and resulting property modifications including mechanical, barrier, and electrical ... -
Influence of graphene wrapped-cerium oxide coating on spherical LiNi0.5Mn1.5O4 particles as cathode in high-voltage lithium-ion batteries
( Elsevier Ltd , 2022 , Article)Cobalt-free LiNi0.5Mn1.5O4 (Lithium Nickel Manganese Oxide; LNMO) has garnered considerable interest as a cathode material due to its high working voltage, lower cost, and environmental friendliness. However, LNMO cathodes ... -
Influence of graphite feedstock on the characteristics of silver-decorated graphene oxide and antimicrobial property
( Chulalognkorn University , 2021 , Article)Graphite from different sources has significant influence on the properties of graphene oxide (GO) and reactivity of GO towards further modification with other nanoparticles. However, such effect has not yet been properly ... -
Influence of lean premixed ratio of PCCI-DI engine fueled by diesel/biodiesel blends on combustion, performance, and emission attributes; a comparison study
( Elsevier Ltd , 2021 , Article)The traditional combustion mode which utilized in the DI diesel engine has high and excessive emissions so the most wanted combustion is creating new modes which produce low combustion temperatures and low emissions. The ... -
Influence of modified clay on the structure and performance of polysulfocomposite membrane
( Desalination Publications , 2018 , Article)Highly porous modified clay material with large surface area known as ?Filtralite? was used as a filler for the preparation of polysulfone (PSf) composite membranes. Filtralite concentration in the membrane composition was ... -
Influence of natural gas composition on adsorption in calcite Nanopores: A DFT study
( Elsevier B.V. , 2021 , Article)Density functional theory is used to study the adsorption of natural gas components in calcite (10.4) cylindrical nanopores with 1–4 nm diameters. The change of adsorption energy with the diameter of the nanopores is studied ... -
Influence of nitrogen doping on the electrocatalytic activity of Ni-incorporated carbon nanofibers toward urea oxidation
( Elsevier Ltd , 2017 , Article)Overall, boosting the formation of the active NiOOH layer distinctly improves the electro catalytic activity of nickel-based materials. Moreover, due to the adsorption capacity, the carbonaceous supports improve the ... -
The influence of paraffin wax addition on the isothermal crystallization of LLDPE
( Wiley , 2016 , Article)The influence of paraffin wax addition on the isothermal crystallization kinetics of linear low density polyethylene (LLDPE) was studied in a temperature range where the wax was always in the molten state and could be ... -
Influence of pH on chloride binding isotherms for cement paste and its components
( Elsevier , 2021 , Article)In this paper, chloride (Cl−) binding isotherms are developed for cement hydration compounds, specifically, calcium-silicate-hydrates (CSH) and AFm phases including mono-sulfate aluminate, hydroxy-AFm, monocarbonate-AFm, ... -
Influence of polyelectrolyte architecture on the electrokinetics and dewaterability of industrial membrane bioreactor activated sludge
( Academic Press , 2019 , Article)Improvement of sludge dewaterability is greatly hindered by the presence of large amounts of interstitial water molecules trapped in the sludge as a result of strong hydrophilic characteristics. This study has investigated ... -
Influence of polyelectrolyte structure and type on the degree of flocculation and rheological behavior of industrial MBR sludge
( Elsevier B.V. , 2020 , Article)The influence of polyelectrolyte's type and structure on the rheological characteristics of industrial highly stable membrane bioreactor (MBR) sludge have been investigated and were related to its degree of flocculation ... -
Influence of polyelectrolytes and other polymer complexes on the flocculation and rheological behaviors of clay minerals: A comprehensive review
( Elsevier B.V. , 2017 , Article Review)Separation of clay minerals from industrial wastewaters is of great academic and practical importance. Current treatment techniques are either not economically viable, not environmentally friendly, or both. Thus, researchers ...
