Search
Now showing items 1-10 of 46
Enhanced performance of nano-sized SiC reinforced Al metal matrix nanocomposites synthesized through microwave sintering and hot extrusion techniques
(
Elsevier B.V.
, 2017 , Article)
In the present study, nano-sized SiC (0, 0.3, 0.5, 1.0 and 1.5 vol%) reinforced aluminum (Al) metal matrix composites were fabricated by microwave sintering and hot extrusion techniques. The structural (XRD, SEM), mechanical ...
Crystallization and dielectric behavior of PLA and PHBV in PLA/PHBV blends and PLA/PHBV/TIO 2 nanocomposites
(
BME-PT and GTE
, 2019 , Article)
The morphology, crystallization behavior and mechanical properties of PLA, PHBV and their blends and nanocomposites with TiO 2 as filler were investigated. An uncommon morphological change was observed with increasing PLA ...
Microwave rapid sintering of al-metal matrix composites: A review on the effect of reinforcements, microstructure and mechanical properties
(
MDPI AG
, 2016 , Article Review)
Aluminum metal matrix composites (AMMCs) are light-weight materials having wide-spread use in the automobile and aerospace industries due to their attractive physical and mechanical properties. The promising mechanical ...
Secondary chain motion and mechanical properties of γ-irradiated-regenerated cellulose films
(
Wiley-VCH Verlag
, 2017 , Article)
Regenerated cellulose films prepared using NaOH/urea solvent system were exposed to different doses of γ-radiation, ranging from 5 to 50 kGy to modify their properties. Change in relative crystallinity as a function of ...
The mechanical and adhesive properties of electrically and thermally conductive polymeric composites based on high density polyethylene filled with nickel powder
(
Elsevier, Ltd
, 2013 , Article)
Electrically and thermally conductive composites made using high density polyethylene (HDPE) matrix blended with a special grade of branch-structured nickel particles were studied. Composites with high filler content were ...
Thermal and mechanical characterization of injection moulded high density polyethylene/paraffin wax blends as phase change materials
(
Elsevier Ltd
, 2014 , Article)
Thermal and mechanical properties of blends based on high density polyethylene and paraffin wax were investigated. The blends were prepared from 5 to 50vol. % of paraffin wax employing a twin-screw extruder. Thermal behaviour ...
Processing, characterization and modeling of recycled polypropylene/glass fibre/wood flour composites
(
Elsevier Ltd
, 2014 , Article)
Polypropylene (PP) is one of the most common thermoplastic materials in the world. There is a need to recycle the large amount of this used material. To overcome the environmental problems, related to the polymer waste, ...
Improved mechanical properties of recycled linear low-density polyethylene composites filled with date palm wood powder
(
Elsevier, Ltd
, 2014 , Article)
Recycled linear low-density polyethylene (RLLDPE) was blended with date palm wood powder to prepare composites in which the concentration of the filler ranged from 10 to 70wt.%. The cross-linking of composites was performed ...
Effect of plasma treatment on accelerated pla degradation
(
BME-PT and GTE
, 2021 , Article)
Poly(lactic acid) (PLA) has been found to be important in various applications, such as in the medical, pharma-ceutical, and packaging industries. However, the long-term associated degradation process of PLA is a limiting ...
Tailoring of the thermal, mechanical and dielectric properties of the polypropylene foams using gamma-irradiation
(
Elsevier Ltd
, 2016 , Article)
This study investigate the influence of gamma-irradiation (GI) doses from 0 up to 50 kGy on the polypropylene (PP) foams, mainly the impact on their structural and physical properties. It was found that structural properties ...