عرض بسيط للتسجيلة

المؤلفRahman, Khaliqur
المؤلفAware, M. V.
المؤلفIqbal, Atif
المؤلفAl-ammari, Rashid
المؤلفAbu-Rub, Haitham
تاريخ الإتاحة2024-05-23T05:12:37Z
تاريخ النشر2014
اسم المنشورIEEE International Symposium on Industrial Electronics
المصدرScopus
المعرّفhttp://dx.doi.org/10.1109/ISIE.2014.6864939
معرّف المصادر الموحدhttp://hdl.handle.net/10576/55313
الملخصMulti-phase matrix converters (more than three phase) are distinctively advantageous as because of reduced per-phase current and unity power factor operation. The electrical motors supplied through these converters do have the common-mode voltage problem. In this paper, an approach to reduce the common-mode voltage is presented through appropriate vectors selection. An availability of the (35) 243 states gives selection freedom within the constraints. The useful ninety three vectors with ninety active and three zero vectors are implemented in conventional space vector modulation technique in matrix converter. The space vector control technique is used with selective large and medium vectors with their disposition in d-q plane having controlled mapping in x-y harmonics plane to reduce the common-mode voltage is discussed. Two operating modes, one within the linear range and another with non-linear range (ten stepping mode) is presented with their performance. The common mode voltage (CMV) voltage reduction with rms voltage gain is observed in ten step operation. The effectiveness of these control algorithms are presented through simulation and verified by implementing it on 2 kVA matrix converter.
راعي المشروعQatar National Research Fund
اللغةen
الناشرInstitute of Electrical and Electronics Engineers Inc.
الموضوعduty cycles
Five phase
Matrix converter
space vector PWM
العنوانCommon-mode voltage control through vector selection in three-to-five phase matrix converter
النوعConference Paper
الصفحات2087-2092


الملفات في هذه التسجيلة

الملفاتالحجمالصيغةالعرض

لا توجد ملفات لها صلة بهذه التسجيلة.

هذه التسجيلة تظهر في المجموعات التالية

عرض بسيط للتسجيلة