Search
Now showing items 1-10 of 28
Compatibilizing role of carbon nanotubes in poly(vinyl alcohol)/starch blend
(
WILEY-VCH Verlag GmbH & Co.
, 2015 , Article)
Polymer nanocomposites based on poly(vinyl alcohol)/starch blend and carbon nanotubes (CNT) were prepared by solution mixing, followed by casting. Glycerol was used as a plasticizer and added in the starch dispersion. The ...
Dynamic mechanical properties of PLA/PHBV, PLA/PCL, PHBV/PCL blends and their nanocomposites with TiO2 as nanofiller
(
Elsevier
, 2015 , Article)
The effect of blending and the addition of small amounts of TiO2 nanoparticles on the dynamic mechanical properties of PLA/PHBV, PLA/PCL and PHBV/PCL blends is reported in this paper. The storage modulus of the PLA/PHBV ...
The role of clay modifier on cure characteristics and properties of epoxy/clay/carboxyl-terminated poly(butadiene-co-acrylonitrile) (CTBN) hybrid
(
Taylor and Francis Ltd.
, 2017 , Article)
Epoxy/clay/carboxyl-terminated poly(butadiene-co-acrylonitrile) (CTBN) hybrids were prepared with two different organically modified clays. Octadecyl amine and trimethyl stearyl ammonium-modified nanoclays (Nanomer I.30E ...
Synthesis and characterisation of Ni–B/Ni–P–CeO2 duplex composite coatings
(
Springer Netherlands
, 2018 , Article)
Abstract: Binary (Ni–B, Ni–P) and duplex coatings (Ni–B/Ni–P, Ni–B/Ni–P–CeO2) with an inner Ni–B layer were electrodeposited on mild steel substrates. A comparison of the structural, surface, mechanical, and electrochemical ...
Elastomer/thermoplastic modified epoxy nanocomposites: The hybrid effect of 'micro' and 'nano' scale
(
Elsevier Ltd
, 2017 , Article Review)
The approach of simultaneously exploit the use of microscale elastomers/thermoplastics and nanoscale fillers for the modification of epoxy systems is presently an active research topic. Such hybrid modification of epoxy ...
Effect of blend ratio and nanofiller localization on the thermal degradation of graphite nanoplatelets-modified PLA/PCL
(
Springer Netherlands
, 2019 , Article)
A variety of poly(lactic acid) (PLA)-poly(ε-caprolactone) (PCL) samples with different PLA:PCL ratios, containing different contents of graphite nanoplatelets (GrP), were analysed in a thermogravimetric analyser (TG) under, ...
Microton irradiation induced tuning of dielectric properties of nano ZnO-natural rubber disks
(
Springer Verlag
, 2017 , Article)
The effect of electron beam irradiation of dielectric and conductivity properties of nano ZnO-natural rubber (NR) disks was investigated here. It is revealed that electric properties such as AC conductivity, dielectric ...
Eco-Friendly Electromagnetic Interference Shielding Materials from Flexible Reduced Graphene Oxide Filled Polycaprolactone/Polyaniline Nanocomposites
(
Taylor and Francis Inc.
, 2016 , Article)
Hybrid nanocomposites have the unique ability of enhancing material properties due to the existing synergistic effect of the fillers. In this study, the authors report such an eco-friendly hybrid nanocomposite comprising ...
Influence of temperature on the confinement effects of micro and nano level graphite filled poly(isoprene-co-isobutylene) composites
(
Springer Netherlands
, 2016 , Article)
Electrically conducting elastomer composites using nanocarbon fillers have utmost significance in the current scenario of flexible electronics. Though a large number of reports have come out in this topic, the influence ...
Electroactive and Optically Adaptive Bionanocomposite for Reconfigurable Microlens
(
American Chemical Society
, 2016 , Article)
This paper introduces an electroactive bionanocomposite based on poly(diethylene glycol adipate) (PDEGA) and cellulose nanocrystals (CNCs). The bionanocomposites were made using CNCs extracted from cotton and by optimizing ...