Center for Advanced Materials: المرسلات الحديثة
السجلات المعروضة 41 -- 60 من 1633
-
Synthesis and Characterization of Chemically and Green-Synthesized Silver Oxide Particles for Evaluation of Antiviral and Anticancer Activity
( Multidisciplinary Digital Publishing Institute (MDPI) , 2024 , Article)Silver oxide (Ag2O) particles are wonderful candidates due to their unique properties, and their use in a wide range of research, industrial and biomedical applications is rapidly increasing. This makes it fundamental to ... -
Development of Biocompatible Electrospun PHBV-PLLA Polymeric Bilayer Composite Membranes for Skin Tissue Engineering Applications
( Multidisciplinary Digital Publishing Institute (MDPI) , 2024 , Article)Bilayer electrospun fibers aimed to be used for skin tissue engineering applications were fabricated for enhanced cell attachment and proliferation. Different ratios of PHBV-PLLA (70:30, 80:20, and 90:10 w/w) blends were ... -
Adsorbent-Embedded Polymeric Membranes for Efficient Dye-Water Treatment
( Multidisciplinary Digital Publishing Institute (MDPI) , 2024 , Article)Traditional bulk adsorbents, employed for the removal of dyes and metal ions, often face the drawback of requiring an additional filtration system to separate the filtrate from the adsorbent. In this study, we address this ... -
Investigating Genetic Diversity and Population Structure in Rice Breeding from Association Mapping of 116 Accessions Using 64 Polymorphic SSR Markers
( Multidisciplinary Digital Publishing Institute (MDPI) , 2024 , Article)Genetic variability in rice breeding programs plays a very crucial role. It provides an outstanding pool of superior alleles governing better agronomic and quality characters through association mapping. For a greater ... -
Stretch-Induced Spin-Cast Membranes Based on Semi-Crystalline Polymers for Efficient Microfiltration
( Multidisciplinary Digital Publishing Institute (MDPI) , 2024 , Article)Microfiltration membranes derived from semi-crystalline polymers face various challenges when synthesized through the extrusion–casting technique, including the use of large quantities of polymer, long casting times, and ... -
Utilizing Recycled Sand from Excavation Wastes for Sustainable Cement Mortar Production
( Salehan Institute of Higher Education , 2024 , Article)This research investigates the feasibility of using recycled sand produced from excavation waste as natural sand alternative for sustainable cement mortar production. Two different types of recycled sand, namely limestone ... -
Degradation and Photocatalytic Properties of Nanocomposites
( Multidisciplinary Digital Publishing Institute (MDPI) , 2024 , Article)The world is suffering from energy consumption and environmental pollution challenges for the next generation era. The developments in the construction of sustainable resources to overcome the energy crises have been made ... -
MXene-based electrochemical devices applied for healthcare applications
( Springer , 2024 , Article Review)The initial part of the review provides an extensive overview about MXenes as novel and exciting 2D nanomaterials describing their basic physico-chemical features, methods of their synthesis, and possible interfacial ... -
Under-deposit corrosion: Investigating dissolution kinetics using artificial pits
( National Assoc. of Corrosion Engineers International , 2018 , Conference)Sour (H2S-containing) environments present a major problem for oil and gas industries: of particular concern is underdeposit corrosion (UDC) which is a type of accelerated localized corrosion observed under deposits (in ... -
Synergistic effect of O3 and H2O2 on the visible photocatalytic degradation of phenolic compounds using TiO2/reduced graphene oxide nanocomposite
( American Scientific Publishers , 2017 , Article)rGOTi is a nanocomposite of reduced graphene oxide (rGO) and TiO2 nanoparticles that was used in an advanced oxidation process to mineralize phenolic compounds in presence of oxidizing agents e.g., H2O2 and ozone. This ... -
Effect of the graphene oxide reduction method on the photocatalytic and electrocatalytic activities of reduced graphene oxide/TiO2 composite
( Royal Society of Chemistry , 2015 , Article)Graphene oxide (GO) was synthesized from commercial graphite using a modified Hummers' method. Three different methods were used to prepare reduced GO/TiO2 composites. GO was (i) initially impregnated over TiO2 (GOTi) and ... -
Ultradispersed Palladium Nanoparticles in Three-Dimensional Dendritic Mesoporous Silica Nanospheres: Toward Active and Stable Heterogeneous Catalysts
( American Chemical Society , 2015 , Article)Immobilization of highly monodispersed palladium nanoparticles in colloidal mesoporous silica supports has been successfully achieved. The Pd nanoparticles with a uniform small size of ∼1.2 nm can be homogeneously distributed ... -
Graphene/TiO2 composite electrode: Synthesis and application towards the oxygen reduction reaction
( Electrochemical Society Inc. , 2014 , Conference)A graphene oxide (GO) was prepared from a commercial graphite nano-crystals using Hummers’ method. Later, GO powder was reduced either by placing it under a H2 gas flow in a controlled gas reactor at 450 oC or using a ... -
Correction to "Tuning the Intermolecular Electron Transfer of Low-Dimensional and Metal-Free BCN/C60 Electrocatalysts via Interfacial Defects for Efficient Hydrogen and Oxygen Electrochemistry"
( American Chemical Society , 2021 , Article)The acknowledgement of an NSF grant by L.E. was incorrectly referenced as CHE-18001317; the correct grant number is CHE-1801317. The full corrected Acknowledgement is included in this Correction. -
The effects of Cr/Mo micro-alloying on the corrosion behavior of carbon steel in CO2-saturated (Sweet) brine under hydrodynamic control
( Electrochemical Society Inc. , 2018 , Article)The effects of micro-alloying of plain carbon steel with Cr and Mo on the corrosion behavior in CO2-saturated (sweet) brine (0.5 M NaCl, pH 6.6) environment, under hydrodynamic conditions, at 80°C were investigated. ... -
Effects of oxygen on scale formation in CO2 corrosion of steel in hot brine: In situ synchrotron X-ray diffraction study of anodic products
( Electrochemical Society Inc. , 2018 , Article)The effect of low concentrations of oxygen on the anodic dissolution of carbon steel in CO2-saturated aqueous NaCl at 80°C is simply to change the dissolution product from colloidal amorphous material assumed to be amorphous ... -
Simulation studies of Sn-based perovskites with Cu back-contact for non-toxic and non-corrosive devices
( Cambridge University Press , 2019 , Article)Using general-purpose photovoltaic device model, we have simulated the operation and functionality of a working Sn perovskite/Cu2O hole transport layer (HTL)/Cu back-contact device versus a standard Pb perovskite/Spiro ... -
Effect of Cr/Mo on the protectiveness of corrosion scales on carbon steel in sweet medium under high flow regime
( Electrochemical Society Inc. , 2017 , Conference)We investigate the effects of Cr/Mo micro-alloying of plain carbon steel on the corrosion behaviour and scale protectiveness in CO2 saturated (sweet) brine (0.5 M NaCl) environment, under hydrodynamic conditions, at 80oC ... -
Corrosion inhibition of C-steel using supported and non-supported Cu-nanoparticles/benzotriazole
( Electrochemical Society Inc. , 2014 , Conference)Depositing Cu nanoparticles (NPs) on the C-steel (Fe) surface using the self-replacement technique has shown a corrosion inhibition efficiency (IE) for C-steel of 98% in acidic medium if the Fe/Cu system was preimmersed ... -
Preface: Carbon Nitride Nanostructures for Sustainable Energy Production and Environmental Remediation
( Royal Society of Chemistry , 2021 , Article)The rational fabrication of graphitic carbon nitrides (gCNs) and their utilization in a wide range of energy and environmental remediation applications is a growing research area, especially in the last two decades. However, ...
