Fabrication and investigation of the scratch and indentation behaviour of new generation Ni-P-nano-NiTi composite coating for oil and gas pipelines
الملخص
Oil and gas pipelines operate under severe mechanical and chemical conditions, which could lead to catastrophic failure. Electroless nickel-phosphorous (Ni-P) coatings are an excellent candidate for protection against wear and corrosion for oil and gas pipelines. Ni-P coatings exhibit superior corrosion resistance over many commercially available coatings, as well as high hardness. However, electroless Ni-P coatings suffer from low toughness, which has limited its use in applications where high scratch and dent resistance is required. To enhance the toughness of the Ni-P coatings, nano-sized particles of superelastic NiTi alloy were incorporated within the coating. In the present work novel Ni-P-nano-NiTi composite coating has been successfully plated on API X100 pipe steel. Scratch tests under constant and increasing loads were performed to determine the effect of NiTi nano-particles on wear damages. Indentation tests were carried out to assess the dent resistance and crack modes of the coating. The addition of superelastic nano-particles into the Ni-P matrix led to toughening through transformation toughening, crack bridging, deflection, and microcracking. The composite coatings exhibited lower hardness in comparison to monolithic Ni-P coatings, but still provided considerable improvement upon the steel substrate. Optical and scanning electron examinations showed evidence of delamination, radial, and Hertzian cracking, as well as a reduction in crack length with the addition of superelastic NiTi.
المجموعات
- الأبحاث [1564 items ]