Growth of MAPbBr3 perovskite crystals and its interfacial properties with Al and Ag contacts for perovskite solar cells
عرض / فتح
التاريخ
2017المؤلف
Najeeb, Mansoor AniAhmad, Zubair
Shakoor, R.A.
Alashraf, Abdulla
Bhadra, Jolly
Al-Thani, N.J.
Al-Muhtaseb, Shaheen A.
Mohamed, A.M.A.
...show more authors ...show less authors
البيانات الوصفية
عرض كامل للتسجيلةالملخص
In this work, the MAPbBr3 perovskite crystals were grown and the interfacial properties of the poly-crystalline MAPbBr3 with Aluminum (Al) and Silver (Ag) contacts has been investigated. MAPbBr3 crystals are turned into the poly-crystalline pellets (PCP) using compaction technique and the Al/PCP, Al/interface layer/PCP, Ag/PCP, and Ag/interface layer/PCP contacts were investigated. Scanning Electron Microscopic (SEM), Energy-dispersive X-ray spectroscopy (EDX) and current-voltage (I-V) characteristic technique were used to have an insight of the degradation mechanism happening at the Metal/perovskite interface. The Ag/PCP contact appears to be stable, whereas Al is found to be highly reactive with the MAPbBr3 perovskite crystals due to the infiltration setback of Al in to the perovskite crystals. The interface layer showed a slight effect on the penetration of Al in to the perovskite crystals however it does not seem to be an appropriate solution. It is noteworthy that the stability of the underlying metal/perovskite contact is very crucial towards the perovskite solar cells with extended device lifetime. 1 2017 Elsevier B.V.
المجموعات
- الأبحاث [1339 items ]
- الهندسة الكيميائية [1141 items ]
وثائق ذات صلة
عرض الوثائق المتصلة بواسطة: العنوان، المؤلف، المنشئ والموضوع.
-
Consequence of aging at Au/HTM/perovskite interface in triple cation 3D and 2D/3D hybrid perovskite solar cells
Ahmad Z.; Mishra A.; Abdulrahim S.M.; Taguchi D.; Sanghyun P.; Aziz F.; Iwamoto M.; Manaka T.; Bhadra J.; Al-Thani N.J.; Nazeeruddin M.K.; Touati F.; Belaidi A.; Al-Muhtaseb S.A.... more authors ... less authors ( Nature Research , 2021 , Article)Perovskite solar cells (PSCs) expressed great potentials for offering a feasible alternative to conventional photovoltaic technologies. 2D/3D hybrid PSCs, where a 2D capping layer is used over the 3D film to avoid the ... -
A numerical approach to study the effect of bandgap and electron affinity in HTL-free perovskite solar cells and design of two-terminal silicon/perovskite tandem solar cell
Ehsan, Raza; Bhadra, Jolly; Asif, Muhammad; Aziz, Fakhra; Al-Thani, Noora J.; Ahmad, Zubair... more authors ... less authors ( Elsevier , 2023 , Article)The hole-transport layer (HTL) free perovskite solar cells with carbon electrode (c-PSCs) have garnered significant attention owing to their simple design, cost-effectiveness, and good stability. However, the power conversion ... -
Bismuth perovskite as a viable alternative to Pb perovskite solar cells: device simulations to delineate critical efficiency dynamics
Pham M.; Harris J.; Shaffer J.; Daniel A.; Chowdhury S.; Ali A.; Banerjee S.; Ahmed S.... more authors ... less authors ( Springer New York LLC , 2019 , Article)We have simulated the operation and functionality of a working Bi-based perovskite solar cell device using GPVDM and compared it against a Pb-based device. The results are extremely promising in that they showcase comparable ...