Inverter-based versus synchronous-based distributed generation; Fault current limitation and protection issues
الملخص
The contribution of distributed generation (DG) to network fault levels depends heavily on the technology employed. In the case of directly connected rotating machines the fault behavior is well established; with synchronous generators contributing higher fault levels than the corresponding induction generators. The contribution of inverter-based distributed generation (IBDG) is the lowest due the capability of this technology to exhibit non over-load characteristics. However the behavior of this generation technology under fault conditions is determined by the employed control methods. In this paper, an investigation of the effect of the DG type on the fault current is investigated. Simulations for case studies have been conducted using Matlab/Simulink.
المجموعات
- الهندسة الكهربائية [2568 items ]
وثائق ذات صلة
عرض الوثائق المتصلة بواسطة: العنوان، المؤلف، المنشئ والموضوع.
-
Ride-through capability of grid-connected brushless cascade DFIG wind turbines in faulty grid conditions-A comparative study
Gowaid, I. A.; Abdel-Khalik, A. S.; Massoud, Ahmed; Ahmed, S. ( IEEE , 2013 , Article)Doubly-fed induction generator (DFIG)-based wind turbines (WTs) are reported to suffer reliability problems due to the presence of slip-rings, brushes, and the gearbox. These disadvantages encouraged several research groups ... -
Assessment of fault-ride through capability of grid-connected brushless DFIG wind turbines
Azmy, I.; Abdel-Khalik, A.; Massoud, Ahmed; Ahmed, S. ( Institution of Engineering and Technology , 2011 , Conference Paper)DFIGs are reported to suffer serious reliability problems due to the presence of slip-rings, brushes and gearbox. These disadvantages encouraged several research groups to investigate the viability of employing single-frame ... -
Model-Free Geometric Fault Detection and Isolation for Nonlinear Systems Using Koopman Operator
Bakhtiaridoust, M.; Yadegar, M.; Meskin, Nader; Noorizadeh, M. ( Institute of Electrical and Electronics Engineers Inc. , 2022 , Article)This paper presents a model-free fault detection and isolation (FDI) method for nonlinear dynamical systems using Koopman operator theory and linear geometric technique. The key idea is to obtain a Koopman-based reduced-order ...