CFD analysis of turbulent flow of power-law fluid in a partially blocked eccentric annulus
الملخص
This study focuses on analyzing the turbulent flow of drilling fluid in inclined wells using the Computational Fluid Dynamics (CFD) technique. The analysis is performed considering an annulus with a fixed eccentricity of 90% and varying fluid properties, diameter ratio, and bed thickness to examine velocity profile, pressure loss, and overall wall and average bed shear stresses. CFD simulation results are compared with existing data for validation. The pressure loss predicted with CFD agrees with the data. After verification, predictions are used to establish a correlation that can be applied to compute bed shear stress. The established correlation mostly displays a discrepancy of up to 10% when compared with simulation data. The correlation can be used to optimize hole cleaning and manage downhole pressure.
معرّف المصادر الموحد
https://www.scopus.com/inward/record.uri?eid=2-s2.0-85106240574&doi=10.3390%2fen14030731&partnerID=40&md5=331861ad80eb5d91a690efeefa01418bالمجموعات
- الهندسة الكيميائية [1155 items ]
- الأبحاث [494 items ]
وثائق ذات صلة
عرض الوثائق المتصلة بواسطة: العنوان، المؤلف، المنشئ والموضوع.
-
CFD modeling of particle settling in drilling fluids: Impact of fluid rheology and particle characteristics
Awad A.M.; Hussein I.A.; Nasser M.S.; Karami H.; Ahmed R. ( Elsevier B.V. , 2021 , Article)The settling of drilling cuttings is important for the drilling and clean-out operations. The current article provides a Computational Fluid Dynamics (CFD) modeling study of particle settling behavior during the drilling ... -
A CFD- RSM study of cuttings transport in non-Newtonian drilling fluids: Impact of operational parameters
Awad A.M.; Hussein I.A.; Nasser M.S.; Ghani S.A.; Mahgoub A.O. ( Elsevier B.V. , 2022 , Article)Cuttings removal out of the wellbore represents a real barrier for successful drilling operations. The performance of hole cleaning is determined by several factors. The current article provides a theoretical study of the ... -
A mechanistic gas kick model to simulate gas in a riser with water and synthetic-based drilling fluid
Manikonda, Kaushik; Hasan, Abu Rashid; Barooah, Abinash; Rahmani, Nazmul H.; El-Naas, Muftah; Sleiti, Ahmad Khalaf; Rahman, Mohammad Azizur... more authors ... less authors ( Society of Petroleum Engineers , 2020 , Conference Paper)This paper presents a simple mechanistic model to describe a gas kick in a drilling riser with water- based mud (WBM) and synthetic-based mud (SBM). This model can estimate key kick parameters such as the change in the ...